You can downgrade to 12.3 for 2600's to run MPLS, but you lose other features. If on a budget constraint, you might have 12.4 and 12.3 in flash and load as needed.
Regards, Jay McMickle- CCNP,CCSP,CCDP Sent from iJay On Apr 6, 2012, at 4:16 AM, Ramcharan Arya <[email protected]> wrote: > Hi > > Unfortunately MPLS feature is not support on anything lower than a 2691 > > > > Here is the link that gives info regarding the MPLS support platforms : > > http://www.cisco.com/en/US/tech/tk436/tk428/technologies_q_and_a_item09186a00800949e5.shtml#qa10 > > > HTH > > Thanks, > Ramcharan Arya > CCIE # 28926 ( R&S) > > On Fri, Apr 6, 2012 at 2:46 AM, naveen bhat <[email protected]> wrote: > >> >> Hi, >> >> I have few 2611XM routers at my Home lab running >> c2600-adventerprisek9-mz.124-9.T7.bin but just realised can't run MPLS when >> i started building it. Does it mean i can't run 12.4(T) on these which is >> the IOS required for CCIE R&S V4? What shall I use to make MPLS work on >> these routers? >> >> Thanks, >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
