Awesome response, Bob. Great help.

Regards,
Jay McMickle- CCNP,CCSP,CCDP
Sent from iJay

On Apr 1, 2012, at 11:42 PM, Bob McCouch <[email protected]> wrote:

> Hi Breland,
> 
> No, physical characteristics must be the same. For example:
> 
> !--- Forced fa0/24 to 'speed 10'
> Fa0/23                       connected    trunk      a-full  a-100
> 10/100BaseTX
> Fa0/24                       connected    trunk      a-full     10
> 10/100BaseTX
> 
> 
> SW1(config-if)#int fa0/23
> SW1(config-if)#channel-group 2 mode on
> Creating a port-channel interface Port-channel 2
> 
> *Mar  1 00:38:44.684: %LINK-3-UPDOWN: Interface Port-channel2, changed
> state to up
> *Mar  1 00:38:45.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Port-channel2, changed state to up
> 
> SW1(config-if)#int fa0/24
> SW1(config-if)#channel-group 2 mode on
> 
> *Mar  1 00:38:52.049: %EC-5-CANNOT_BUNDLE2: Fa0/24 is not compatible with
> Fa0/23 and will be suspended (speed of Fa0/24 is 10M, Fa0/23 is 100M)
> *Mar  1 00:38:53.047: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/24, changed state to down
> 
> Also, see this set of configuration guidelines:
> http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_50_se/configuration/guide/swethchl.html#wp1275881
> 
> Hope that helps,
> Bob
> 
> On Mon, Apr 2, 2012 at 12:19 AM, Breland Rogers <[email protected]>wrote:
> 
>> Hello,
>> 
>> When configuring ether-channel, would it work to mix and match interfaces.
>> For example 1 mbps interface and 1 gig interface?   This makes no design
>> sense but just curious.
>> 
>> Thanks
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>> 
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to