Hi fellas,

I need help please about my ip new bgp-community command, IT IS not showing
between my R8 AND R7, here is my configuration:


R8

router bgp 7800
 no synchronization
 bgp log-neighbor-changes
 network 100.100.200.0 mask 255.255.255.0
 network 150.100.78.0 mask 255.255.255.0
 network 150.100.81.0 mask 255.255.255.0
 network 200.0.0.8 mask 255.255.255.255
 neighbor 100.100.200.200 remote-as 701
 neighbor 150.100.78.7 remote-as 7800
 neighbor 150.100.78.7 next-hop-self
 neighbor 150.100.78.7 send-community both     ------> the required
command for the ip new bgp-community bet ( R7 AND R8)
 neighbor 150.100.81.11 remote-as 10101
 neighbor 150.100.81.11 next-hop-self
 no auto-summary
ip bgp-community new-format


202.0.0.0/22 route comming from BB2 is not showing the community value of
if ? which is suppose to be 701:


R8(config-router)#do sh ip bgp 202.0.0.0
BGP routing table entry for 202.0.0.0/22, version 16
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
        1    2
  701
    100.100.200.200 from 100.100.200.200 (202.1.16.2)
      Origin IGP, metric 0, localpref 100, valid, external, best
R8(config-router)#

R7

R7#sr | s bgp
router bgp 7800
 no synchronization
 bgp log-neighbor-changes
 network 150.100.78.0 mask 255.255.255.0
 network 150.100.220.0 mask 255.255.255.0
 network 150.100.221.0 mask 255.255.255.0
 network 200.0.0.7 mask 255.255.255.255
 neighbor 150.100.78.8 remote-as 7800
 neighbor 150.100.78.8 next-hop-self
 neighbor 150.100.78.8 route-map ASN10101 in
 neighbor 200.0.0.5 remote-as 109
 neighbor 200.0.0.5 ebgp-multihop 255
 neighbor 200.0.0.5 update-source Loopback0
 neighbor 200.0.0.6 remote-as 109
 neighbor 200.0.0.6 ebgp-multihop 255
 neighbor 200.0.0.6 update-source Loopback0
 no auto-summary
ip bgp-community new-format
R7#

R7#sh ip bgp 202.0.0.0
BGP routing table entry for 202.0.0.0/22, version 9
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
        1
  701
    150.100.78.8 from 150.100.78.8 (200.0.0.8)
      Origin IGP, metric 0, localpref 100, valid, internal, best
R7#
many thanks,

khaled
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to