Keep in mind, too, that the real lab uses 3560s (since 3750s would add no benefit as stacking is not tested in the CCIE RS lab), so while 3750s are functionally equivalent to 3560s, you also have the added "module" identifier on each port (fa1/0/1 rather than fa0/1). A minor point for feature exploration, but if you're working on building speed and accuracy I actually think practicing on 3750s and then going to lab on 3560s could trip you up. You may be mis-typing interface identifiers all day!
Sent from my iPad On Feb 26, 2012, at 1:01 PM, Joe Danrich <[email protected]> wrote: > Hello Peoples > > Can anyone provide me some feedback on why 3550 and 3560 switches are those > that are used in the Proctor labs instead of older 3750 switches? > > Is it because this is what the Cisco lab has? > > Does anyone know what the downside would be to using 3750? > > I realize that there is probably at least one command difference between the > 3550 and the 3750, but is that anything less that would make people not use > the 3750 switches? > > Ta > > Joe > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
