Hi experts,
Probably I have miss-understand some piece of OSPF.
Can you please let me know why r1 doesn't adverrise networks defined
under ospf statment.
r1#sh run | s router ospf
router ospf 1
router-id 1.1.1.1
log-adjacency-changes
network 43.34.32.1 0.0.0.0 area 0
network 55.55.55.4 0.0.0.0 area 0
network 66.66.66.1 0.0.0.0 area 0
network 172.16.0.1 0.0.0.0 area 0
r1#sh ip int brief | ex una
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 3.3.3.1 YES NVRAM up
up
FastEthernet0/1 55.55.55.4 YES NVRAM up
up
Serial0/3/0 172.16.0.1 YES NVRAM up
up
Vlan10 66.66.66.1 YES manual up
up
Loopback87 43.34.32.1 YES NVRAM up
up
r1#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
3.3.3.3 1 FULL/DR 00:00:30 172.16.0.3 Serial0/3/0
r1#sh ip ospf database self
OSPF Router with ID (1.1.1.1) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
1.1.1.1 1.1.1.1 574 0x80000009 0x00CF89 4
r1#
Thanks,
Paul
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
