Hello Abel, Did you read my blog called "Exploring the Frame Relay Cloud"? I provide functional configuration for FRoGRE in there.
Take a look at it here: http://blog.ipexpert.com/2010/05/21/exploring-the-frame-relay-cloud/ *disclaimer* I didn't fully read your question, as I'm in the class. This is my initial response. I will go over your configurations when the time permits and see if you missed something. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ On Tue, Jul 27, 2010 at 16:15, Abel ... <[email protected]> wrote: > At the moment I'm trying to configure a Frame-relay switch with two 2811 > connecting each other over a fastethernet. First router have 3 WIC-2T and > the second 1 WIC-2T. As the output show the frame-relay PVC over the GRE > tunnels never come up. I read and re-read a few configuration examples and > everything says that configuring must do the trick but for some reason my > home lab is against me. Thanks for the help in advanced. > -------------------------------------------------------------------- > hostname FR1 > ! > frame-relay switching > ! > interface Tunnel0 > no ip address > tunnel source FastEthernet0/0 > tunnel destination 10.10.10.20 > ! > interface FastEthernet0/0 > ip address 10.10.10.10 255.255.255.0 > duplex auto > speed auto > ! > interface Serial0/0/0 > description Connected to R1 > no ip address > encapsulation frame-relay > clock rate 128000 > frame-relay intf-type dce > frame-relay route 102 interface Tunnel0 201 > frame-relay route 103 interface Serial0/0/1 301 > frame-relay route 104 interface Serial0/1/0 401 > frame-relay route 105 interface Serial0/1/1 501 > frame-relay route 106 interface Serial0/2/0 601 > frame-relay route 112 interface Tunnel0 211 > ! > interface Serial0/0/1 > description Connected to R3 > no ip address > encapsulation frame-relay > frame-relay intf-type dce > frame-relay route 301 interface Serial0/0/0 103 > frame-relay route 302 interface Tunnel0 203 > frame-relay route 304 interface Serial0/1/0 403 > frame-relay route 305 interface Serial0/1/1 503 > frame-relay route 306 interface Serial0/2/0 603 > ! > interface Serial0/1/0 > description Connected to R4 > no ip address > encapsulation frame-relay > frame-relay intf-type dce > frame-relay route 401 interface Serial0/0/0 104 > frame-relay route 402 interface Tunnel0 204 > frame-relay route 403 interface Serial0/0/1 304 > frame-relay route 405 interface Serial0/1/1 504 > frame-relay route 406 interface Serial0/2/0 604 > ! > interface Serial0/1/1 > description Connected to R5 > no ip address > encapsulation frame-relay > clock rate 128000 > frame-relay intf-type dce > frame-relay route 501 interface Serial0/0/0 105 > frame-relay route 502 interface Tunnel0 205 > frame-relay route 503 interface Serial0/0/1 305 > frame-relay route 504 interface Serial0/1/0 405 > frame-relay route 506 interface Serial0/2/0 605 > ! > interface Serial0/2/0 > description Connected to R6 > no ip address > encapsulation frame-relay > clock rate 128000 > frame-relay intf-type dce > frame-relay route 601 interface Serial0/0/0 106 > frame-relay route 602 interface Tunnel0 206 > frame-relay route 603 interface Serial0/0/1 306 > frame-relay route 604 interface Serial0/1/0 406 > frame-relay route 605 interface Serial0/1/1 506 > ! > interface Serial0/2/1 > description Connected to BB1 > no ip address > encapsulation frame-relay > shutdown > frame-relay intf-type dce > ! > end > > FR1#sh version > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version > 12.4(18b), RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2008 by Cisco Systems, Inc. > Compiled Mon 19-May-08 15:43 by prod_rel_team > ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) > FR1 uptime is 6 days, 23 hours, 26 minutes > System returned to ROM by reload at 23:57:35 UTC Tue Jul 20 2010 > System image file is "flash:c2800nm-adventerprisek9-mz.124-18b.bin" > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > A summary of U.S. laws governing Cisco cryptographic products may be found > at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > If you require further assistance please contact us by sending email to > [email protected]. > Cisco 2811 (revision 53.50) with 245760K/16384K bytes of memory. > Processor board ID FHK1101F2MA > 2 FastEthernet interfaces > 6 Serial(sync/async) interfaces > 16 terminal lines > 1 Virtual Private Network (VPN) Module > DRAM configuration is 64 bits wide with parity enabled. > 239K bytes of non-volatile configuration memory. > 62720K bytes of ATA CompactFlash (Read/Write) > Configuration register is 0x2102 > FR1#sh frame-relay route > Input Intf Input Dlci Output Intf Output Dlci Status > Serial0/0/0 102 Tunnel0 201 inactive > Serial0/0/0 103 Serial0/0/1 301 active > Serial0/0/0 104 Serial0/1/0 401 active > Serial0/0/0 105 Serial0/1/1 501 active > Serial0/0/0 106 Serial0/2/0 601 active > Serial0/0/0 112 Tunnel0 211 inactive > Serial0/0/1 301 Serial0/0/0 103 active > Serial0/0/1 302 Tunnel0 203 inactive > Serial0/0/1 304 Serial0/1/0 403 active > Serial0/0/1 305 Serial0/1/1 503 active > Serial0/0/1 306 Serial0/2/0 603 active > Serial0/1/0 401 Serial0/0/0 104 active > Serial0/1/0 402 Tunnel0 204 inactive > Serial0/1/0 403 Serial0/0/1 304 active > Serial0/1/0 405 Serial0/1/1 504 active > Serial0/1/0 406 Serial0/2/0 604 active > Serial0/1/1 501 Serial0/0/0 105 active > Serial0/1/1 502 Tunnel0 205 inactive > Serial0/1/1 503 Serial0/0/1 305 active > Serial0/1/1 504 Serial0/1/0 405 active > Serial0/1/1 506 Serial0/2/0 605 active > Serial0/2/0 601 Serial0/0/0 106 active > Serial0/2/0 602 Tunnel0 206 inactive > Serial0/2/0 603 Serial0/0/1 306 active > Serial0/2/0 604 Serial0/1/0 406 active > Serial0/2/0 605 Serial0/1/1 506 active > Tunnel0 201 Serial0/0/0 102 active > Tunnel0 203 Serial0/0/1 302 active > Tunnel0 204 Serial0/1/0 402 active > Tunnel0 205 Serial0/1/1 502 active > Tunnel0 206 Serial0/2/0 602 active > Tunnel0 211 Serial0/0/0 112 active > > > ---------------------------------------------------------------------------------------- > FR2 > interface Tunnel0 > no ip address > tunnel source FastEthernet0/0 > tunnel destination 10.10.10.10 > ! > interface FastEthernet0/0 > ip address 10.10.10.20 255.255.255.0 > duplex auto > speed auto > ! > interface Serial0/2/0 > description Connected to R2 > no ip address > encapsulation frame-relay > frame-relay intf-type dce > frame-relay route 201 interface Tunnel0 102 > frame-relay route 203 interface Tunnel0 302 > frame-relay route 204 interface Tunnel0 402 > frame-relay route 205 interface Tunnel0 502 > frame-relay route 206 interface Tunnel0 602 > ! > interface Serial0/2/1 > description Connected to R2 > no ip address > encapsulation frame-relay > frame-relay intf-type dce > frame-relay route 211 interface Tunnel0 112 > ! > end > FR2#sh version > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version > 12.4(18b), RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2008 by Cisco Systems, Inc. > Compiled Mon 19-May-08 15:43 by prod_rel_team > ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) > FR2 uptime is 12 minutes > System returned to ROM by reload at 20:20:00 UTC Tue Jul 27 2010 > System image file is "flash:c2800nm-adventerprisek9-mz.124-18b.bin" > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > A summary of U.S. laws governing Cisco cryptographic products may be found > at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > If you require further assistance please contact us by sending email to > [email protected]. > Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory. > Processor board ID FTX1035A30J > 11 FastEthernet interfaces > 2 Serial(sync/async) interfaces > 1 Virtual Private Network (VPN) Module > DRAM configuration is 64 bits wide with parity enabled. > 239K bytes of non-volatile configuration memory. > 62592K bytes of ATA CompactFlash (Read/Write) > Configuration register is 0x2102 > ------------------------------------------------- > R1#sh frame-relay pvc | include DLCI > DLCI = 102, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 103, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 104, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 105, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 106, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 112, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0/0 > R2#sh frame-relay pvc | include DLCI > DLCI = 201, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0 > DLCI = 203, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0 > DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0 > DLCI = 205, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0 > DLCI = 206, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0 > DLCI = 211, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/1 > R3#sh frame-relay pvc | include DLCI > DLCI = 301, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 302, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 304, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 305, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > DLCI = 306, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = > Serial0/0/0 > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
