At the moment I'm trying to configure a Frame-relay switch with two 2811 connecting each other over a fastethernet. First router have 3 WIC-2T and the second 1 WIC-2T. As the output show the frame-relay PVC over the GRE tunnels never come up. I read and re-read a few configuration examples and everything says that configuring must do the trick but for some reason my home lab is against me. Thanks for the help in advanced.
-------------------------------------------------------------------- hostname FR1 ! frame-relay switching ! interface Tunnel0 no ip address tunnel source FastEthernet0/0 tunnel destination 10.10.10.20 ! interface FastEthernet0/0 ip address 10.10.10.10 255.255.255.0 duplex auto speed auto ! interface Serial0/0/0 description Connected to R1 no ip address encapsulation frame-relay clock rate 128000 frame-relay intf-type dce frame-relay route 102 interface Tunnel0 201 frame-relay route 103 interface Serial0/0/1 301 frame-relay route 104 interface Serial0/1/0 401 frame-relay route 105 interface Serial0/1/1 501 frame-relay route 106 interface Serial0/2/0 601 frame-relay route 112 interface Tunnel0 211 ! interface Serial0/0/1 description Connected to R3 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay route 301 interface Serial0/0/0 103 frame-relay route 302 interface Tunnel0 203 frame-relay route 304 interface Serial0/1/0 403 frame-relay route 305 interface Serial0/1/1 503 frame-relay route 306 interface Serial0/2/0 603 ! interface Serial0/1/0 description Connected to R4 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay route 401 interface Serial0/0/0 104 frame-relay route 402 interface Tunnel0 204 frame-relay route 403 interface Serial0/0/1 304 frame-relay route 405 interface Serial0/1/1 504 frame-relay route 406 interface Serial0/2/0 604 ! interface Serial0/1/1 description Connected to R5 no ip address encapsulation frame-relay clock rate 128000 frame-relay intf-type dce frame-relay route 501 interface Serial0/0/0 105 frame-relay route 502 interface Tunnel0 205 frame-relay route 503 interface Serial0/0/1 305 frame-relay route 504 interface Serial0/1/0 405 frame-relay route 506 interface Serial0/2/0 605 ! interface Serial0/2/0 description Connected to R6 no ip address encapsulation frame-relay clock rate 128000 frame-relay intf-type dce frame-relay route 601 interface Serial0/0/0 106 frame-relay route 602 interface Tunnel0 206 frame-relay route 603 interface Serial0/0/1 306 frame-relay route 604 interface Serial0/1/0 406 frame-relay route 605 interface Serial0/1/1 506 ! interface Serial0/2/1 description Connected to BB1 no ip address encapsulation frame-relay shutdown frame-relay intf-type dce ! end FR1#sh version Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(18b), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 19-May-08 15:43 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) FR1 uptime is 6 days, 23 hours, 26 minutes System returned to ROM by reload at 23:57:35 UTC Tue Jul 20 2010 System image file is "flash:c2800nm-adventerprisek9-mz.124-18b.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to [email protected]. Cisco 2811 (revision 53.50) with 245760K/16384K bytes of memory. Processor board ID FHK1101F2MA 2 FastEthernet interfaces 6 Serial(sync/async) interfaces 16 terminal lines 1 Virtual Private Network (VPN) Module DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 FR1#sh frame-relay route Input Intf Input Dlci Output Intf Output Dlci Status Serial0/0/0 102 Tunnel0 201 inactive Serial0/0/0 103 Serial0/0/1 301 active Serial0/0/0 104 Serial0/1/0 401 active Serial0/0/0 105 Serial0/1/1 501 active Serial0/0/0 106 Serial0/2/0 601 active Serial0/0/0 112 Tunnel0 211 inactive Serial0/0/1 301 Serial0/0/0 103 active Serial0/0/1 302 Tunnel0 203 inactive Serial0/0/1 304 Serial0/1/0 403 active Serial0/0/1 305 Serial0/1/1 503 active Serial0/0/1 306 Serial0/2/0 603 active Serial0/1/0 401 Serial0/0/0 104 active Serial0/1/0 402 Tunnel0 204 inactive Serial0/1/0 403 Serial0/0/1 304 active Serial0/1/0 405 Serial0/1/1 504 active Serial0/1/0 406 Serial0/2/0 604 active Serial0/1/1 501 Serial0/0/0 105 active Serial0/1/1 502 Tunnel0 205 inactive Serial0/1/1 503 Serial0/0/1 305 active Serial0/1/1 504 Serial0/1/0 405 active Serial0/1/1 506 Serial0/2/0 605 active Serial0/2/0 601 Serial0/0/0 106 active Serial0/2/0 602 Tunnel0 206 inactive Serial0/2/0 603 Serial0/0/1 306 active Serial0/2/0 604 Serial0/1/0 406 active Serial0/2/0 605 Serial0/1/1 506 active Tunnel0 201 Serial0/0/0 102 active Tunnel0 203 Serial0/0/1 302 active Tunnel0 204 Serial0/1/0 402 active Tunnel0 205 Serial0/1/1 502 active Tunnel0 206 Serial0/2/0 602 active Tunnel0 211 Serial0/0/0 112 active ---------------------------------------------------------------------------------------- FR2 interface Tunnel0 no ip address tunnel source FastEthernet0/0 tunnel destination 10.10.10.10 ! interface FastEthernet0/0 ip address 10.10.10.20 255.255.255.0 duplex auto speed auto ! interface Serial0/2/0 description Connected to R2 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay route 201 interface Tunnel0 102 frame-relay route 203 interface Tunnel0 302 frame-relay route 204 interface Tunnel0 402 frame-relay route 205 interface Tunnel0 502 frame-relay route 206 interface Tunnel0 602 ! interface Serial0/2/1 description Connected to R2 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay route 211 interface Tunnel0 112 ! end FR2#sh version Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(18b), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 19-May-08 15:43 by prod_rel_team ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) FR2 uptime is 12 minutes System returned to ROM by reload at 20:20:00 UTC Tue Jul 27 2010 System image file is "flash:c2800nm-adventerprisek9-mz.124-18b.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to [email protected]. Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory. Processor board ID FTX1035A30J 11 FastEthernet interfaces 2 Serial(sync/async) interfaces 1 Virtual Private Network (VPN) Module DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 62592K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 ------------------------------------------------- R1#sh frame-relay pvc | include DLCI DLCI = 102, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0/0 DLCI = 103, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 104, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 105, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 106, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 112, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0/0 R2#sh frame-relay pvc | include DLCI DLCI = 201, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0 DLCI = 203, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0 DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0 DLCI = 205, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0 DLCI = 206, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0 DLCI = 211, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/1 R3#sh frame-relay pvc | include DLCI DLCI = 301, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 302, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial0/0/0 DLCI = 304, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 305, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0 DLCI = 306, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/0
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
