Just wanted to confirm that yes, the DLCI mapping on the FRS was my issue. I have mapped them on the FRS and the interfaces came up, as-is, with the config I put on them earlier today.
Thanks again! Regards, Jay McMickle- CCNP, CCSP, MCSE ________________________________ From: Markku Leiniö <[email protected]> To: Jay McMickle <[email protected]> Cc: [email protected] Sent: Wed, July 21, 2010 3:01:59 PM Subject: Re: [OSL | CCIE_RS] CCIE_RS Digest, Vol 54, Issue 67 So: 150.100.24.x (DLCI 204 & 402) is working 150.100.100.x (DLCI 205, 206, 502, 602) is working 150.200.200.x (DLCI 214, 215, 216, 412, 512, 612) is not working. Are you sure you have the DLCIs 214, 215, 216, 412, 512, 612 defined in your FR switch? Can you please post the "show frame pvc" output? (You only mentioned maps below) Markku On Wed, Jul 21, 2010 at 9:14 PM, Jay McMickle <[email protected]> wrote: > @ Tyson- Yes, the frame-relay maps show active and static (minus the one > facing R4 which is dynamic, per the lab) > > I can ping across both frame clouds (150.100.24.x and 150.100.100.x). > > @ Marko- This is my own gear. 9x2811, 4x3750's, and 1x3845. > > > > > Regards, > Jay McMickle- CCNP, CCSP, MCSE > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
