One more thing... Hit send before I was done typing on the last one! This is R4 - You are advertising the exact same networks into EIGRP 100 and OSPF 1... With EIRGP, make sure you add an inverse mask. "network 150.1.X.0 0.0.0.255"
router eigrp 100 passive-interface Serial0/0 network 150.1.0.0 network 155.1.0.0 no auto-summary ! router ospf 1 router-id 150.1.4.4 log-adjacency-changes passive-interface FastEthernet0/1 passive-interface Serial0/1 network 150.1.0.0 0.0.255.255 area 0 network 155.1.0.0 0.0.255.255 area 0 distance ospf external 171 On May 23, 2010, at 3:36 PM, Mustafa Yadav wrote: > there was a passive int in r4 even I removed that it did not help.When I make > ospf distance to 171 I started to see the prefix in r6 route table.but I > think still I am doing something wrong.Without changeing distance it has to > work > > On Sun, May 23, 2010 at 10:28 PM, Mustafa Yadav <[email protected]> > wrote: > yes r3 is spoke and r5 is hub in frame relay.I attached r4 r5 and r6 config. > > > On Sun, May 23, 2010 at 10:20 PM, Adrian Brayton <[email protected]> wrote: > If you did the redistribution correctly, it should be in R6s table as an EX > (170) route... Does this involve Frame-Relay? When you redistribute > EIGRP==>OSPF, you are adding the "subnets" keyword and OSPF==>EIGRP adding a > metric? > > Can you please send your configs? > > > > > On May 23, 2010, at 3:12 PM, Mustafa Yadav wrote: > > > hi all > > > > > > r3****ospf***** r5******eigrp****r4*****eigrp*****r6 > > > > > > According to the below diagram I am trying to redistribute r3 loopback into > > r6.R5 talks eigrp and ospf as well. in r4 I can see that it has learned > > this ip adress via ospf (even it is not shown there is an ospf connection > > between r3 and r4).In R4 when I execute sh ip eigrp topology I see that 0 > > successors, FD is Inaccessible which is normal since this prefix is not in > > the routing table and learned from another protocol.But how can I put this > > prefix into r6 router table? > > > > many thanks > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
