A reload did not resolve the issue.
On Sat, Feb 6, 2010 at 7:17 PM, Marko Milivojevic <[email protected]> wrote: > On Sun, Feb 7, 2010 at 00:46, marc abel <[email protected]> wrote: >> I am working on lab 33 and my connection between R1 fa0/0 and R2 g0/0 >> is giving me some weird problems. If I ping I get 20-60% success but >> the rest of the packets drop. >> >> R1(config-if)#do ping fe80::2 >> Output Interface: fastethernet0/0 >> Type escape sequence to abort. >> Sending 5, 100-byte ICMP Echos to FE80::2, timeout is 2 seconds: >> Packet sent with a source address of FE80::1 >> !..!! >> Success rate is 60 percent (3/5), round-trip min/avg/max = 0/0/0 ms >> >> I'll post my configs if there is anything I might have done to cause >> this but the intermittent nature of it makes me wonder if I don't have >> a hardware problem. I don't have much besides IPV6 and OSPF setup at >> this point. I am on pod 110. > > Hi, > > I have seen this issue from time to time and I think it's the IOS we > are running. We're preparing the upgrade in the next few weeks, so > hopefully that will go away. > > Have you tried reloading? > > -- > Marko Milivojevic - CCIE #18427 > Senior Technical Instructor - IPexpert > > Mailto: [email protected] > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > R&S Video on Demand Demo: http://bit.ly/aFyrU4 > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
