I am working on lab 33 and my connection between R1 fa0/0 and R2 g0/0 is giving me some weird problems. If I ping I get 20-60% success but the rest of the packets drop.
R1(config-if)#do ping fe80::2 Output Interface: fastethernet0/0 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to FE80::2, timeout is 2 seconds: Packet sent with a source address of FE80::1 !..!! Success rate is 60 percent (3/5), round-trip min/avg/max = 0/0/0 ms I'll post my configs if there is anything I might have done to cause this but the intermittent nature of it makes me wonder if I don't have a hardware problem. I don't have much besides IPV6 and OSPF setup at this point. I am on pod 110. -Marc _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
