On Sun, Feb 7, 2010 at 00:46, marc abel <[email protected]> wrote: > I am working on lab 33 and my connection between R1 fa0/0 and R2 g0/0 > is giving me some weird problems. If I ping I get 20-60% success but > the rest of the packets drop. > > R1(config-if)#do ping fe80::2 > Output Interface: fastethernet0/0 > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to FE80::2, timeout is 2 seconds: > Packet sent with a source address of FE80::1 > !..!! > Success rate is 60 percent (3/5), round-trip min/avg/max = 0/0/0 ms > > I'll post my configs if there is anything I might have done to cause > this but the intermittent nature of it makes me wonder if I don't have > a hardware problem. I don't have much besides IPV6 and OSPF setup at > this point. I am on pod 110.
Hi, I have seen this issue from time to time and I think it's the IOS we are running. We're preparing the upgrade in the next few weeks, so hopefully that will go away. Have you tried reloading? -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 R&S Video on Demand Demo: http://bit.ly/aFyrU4 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
