Booted PeppermintOS Linux to get device vendor id. The output is attached.
There is also curiously as "Panasonic Device Support" device, so I included that incase that was helpful. Unsure. On Wed, 25 Sep 2024 19:09:42 -0500 izzy Meyer <izder...@disroot.org> wrote: > >Synopsis: Panasonic Let's Note CF-NX4 touchpad not configured > >Category: system amd64 > >Environment: > System : OpenBSD 7.6 > Details : OpenBSD 7.6 (GENERIC.MP) #332: Tue Sep 24 > 15:03:42 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > Machine : amd64 > >Description: > > I am running -CURRENT GENERIC.MP #332, although this was also > the case on 7.5-STABLE > > On my Panasonic Let's Note CF-NX4, my touchpad is not being > registered. It loads as ps/2 according to wsconsctl(8): > > doas wsconsctl mouse > mouse.type=ps2 > mouse.reverse_scrolling=0 > > This makes two finger scrolling, as well as edge scrolling > non-functional. On linux, the touchpad seems to register and > behave fine. The scrolling on this odd, circular touchpad is > two-fingered by default, but it *should* support edge > scrolling via the silver ring similar to an iPod back in the day. > > >How-To-Repeat: > > Install OpenBSD 7.5 >= -CURRENT 7.6 #332, See touchpad itsn't > working as expected. > > >Fix: > > No fix yet. > > dmesg: > OpenBSD 7.6 (GENERIC.MP) #332: Tue Sep 24 15:03:42 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17030901760 (16241MB) > avail mem = 16491356160 (15727MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xdba32000 (35 entries) > bios0: vendor American Megatrends Inc. version "V1.50L20" date > 07/03/2019 bios0: Panasonic Corporation CFSX4-1 > efi0 at bios0: UEFI 2.4 > efi0: American Megatrends rev 0x5000a > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT ASF! TCPA > SLIC UEFI SSDT SSDT SSDT SSDT SSDT SSDT MSDM DMAR BGRT acpi0: wakeup > devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) XHC1(S3) > EHC1(S3) HDEF(S3) GLAN(S4) RP03(S3) PXSX(S3) LID0(S4) acpitimer0 at > acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT > compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) > Core(TM) i5-5300U CPU @ 2.30GHz, 2693.85 MHz, 06-3d-04, patch 0000002f > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ> cpu0: cpuid 7.0 > ebx=21c2fbb<FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT> > edx=9c000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> cpu0: > cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 > eax=1<XSAVEOPT> cpu0: cpuid 80000001 > edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP> cpu0: > cpuid 80000007 edx=100<ITSC> cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way > D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, > 3MB 64b/line 12-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: > Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic > clock running at 99MHz cpu0: mwait min=64, max=64, > C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application > processor) cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.90 > MHz, 06-3d-04, patch 0000002f cpu1: smt 0, core 1, package 0 cpu2 at > mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) > i5-5300U CPU @ 2.30GHz, 2694.03 MHz, 06-3d-04, patch 0000002f cpu2: > smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application > processor) cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.90 > MHz, 06-3d-04, patch 0000002f cpu3: smt 1, core 1, package 0 ioapic0 > at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpimcfg0 at > acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus -1 (PEG2) > acpiprt4 at acpi0: bus 1 (RP01) > acpiprt5 at acpi0: bus -1 (RP02) > acpiprt6 at acpi0: bus 2 (RP03) > acpiprt7 at acpi0: bus -1 (RP05) > acpiprt8 at acpi0: bus -1 (RP06) > acpiprt9 at acpi0: bus -1 (RP07) > acpiprt10 at acpi0: bus -1 (RP08) > acpiprt11 at acpi0: bus -1 (RP04) > acpiec0 at acpi0 > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > "INT3404" at acpi0 not configured > "INT3403" at acpi0 not configured > "INT3403" at acpi0 not configured > "INT3403" at acpi0 not configured > "INT3403" at acpi0 not configured > "MAT0024" at acpi0 not configured > acpicmos0 at acpi0 > tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x001a15d1 > rev 0x10 "INT3402" at acpi0 not configured > "MAT0021" at acpi0 not configured > "MAT0019" at acpi0 not configured > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT1 model "CF-VZSU76" serial 00221 type LION oem > "Panasonic" acpibtn0 at acpi0: LID0(wakeup) > acpibtn1 at acpi0: PWRB > "MAT0028" at acpi0 not configured > "INT3400" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpicpu0 at acpi0: C2(200@230 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(200@230 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(200@230 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(200@230 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PG00, resource for PEG0 > acpipwrres1 at acpi0: PG01, resource for PEG1 > acpipwrres2 at acpi0: PG02, resource for PEG2 > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 130 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2693 MHz: speeds: 2301, 2300, 2200, 2000, > 1900, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 900, 800, 600, 500 MHz > pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G > Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics > 5500" rev 0x09 drm0 at inteldrm0 > inteldrm0: msi, BROADWELL, gen 8 > azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: > msi azalia0: No codecs found > "Intel Core 5G Thermal" rev 0x09 at pci0 dev 4 function 0 not > configured xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev > 0x03: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function > 0 not configured em0 at pci0 dev 25 function 0 "Intel I218-LM" rev > 0x03: msi, address a8:13:74:92:52:d5 azalia1 at pci0 dev 27 function 0 > "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Realtek > ALC269 audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi > pci2 at ppb1 bus 2 > iwx0 at pci2 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix > ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 > int 23 usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" > rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev > 0x03: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s > ahci0: PHY offline on port 1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, PNY CS900 1TB SS, CS90> > naa.5f8db4c231500177 sd0: 953869MB, 512 bytes/sector, 1953525168 > sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" > rev 0x03: apic 2 int 18 iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB > Receiver" rev 2.00/29.01 addr 2 uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB > Receiver" rev 2.00/29.01 addr 2 uhidev1: iclass 3/1, 17 report ids > uhidpp0 at uhidev1 device 1 keyboard " ", device 2 mouse "Wireless > Mouse" ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > wsmouse1 at ums0 mux 0 > ucc0 at uhidev1 reportid 3: 652 usages, 20 keys, array > wskbd2 at ucc0 mux 1 > uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0 > ugen0 at uhub0 port 4 "Intel Bluetooth" rev 2.01/0.01 addr 3 > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Vimicro Corp. USB > HD Webcam" rev 2.00/1.16 addr 4 video0 at uvideo0 > uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.03 addr 2 vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 953609MB, 512 bytes/sector, 1952992063 sectors > root on sd1a (a0f3b8fa1c060e16.a) swap on sd1b dump on sd1b > inteldrm0: 1600x900, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using > wskbd0 wskbd1: connecting to wsdisplay0 > wskbd2: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ugen0 detached > iwx0: hw rev 0x340, fw 77.a20fb07d.0, address 08:d2:3e:a1:1a:da > > usbdevs: > Controller /dev/usb0: > addr 01: 8086:0000 Intel, xHCI root hub > super speed, self powered, config 1, rev 1.00 > driver: uhub0 > addr 02: 046d:c534 Logitech, USB Receiver > full speed, power 98 mA, config 1, rev 29.01 > driver: uhidev0 > driver: uhidev1 > addr 04: 5986:0297 Vimicro Corp., USB HD Webcam > high speed, power 256 mA, config 1, rev 1.16, iSerial > MI1320_SOC driver: uvideo0 > Controller /dev/usb1: > addr 01: 8086:0000 Intel, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub1 > addr 02: 8087:8001 Intel, Rate Matching Hub > high speed, self powered, config 1, rev 0.03 > driver: uhub2 > -- iz (they/them) > i like to say mundane things, > there are too many uninteresting things > that go unnoticed. izder456 (dot) neocities (dot) org
peplive@PepOS-Live:~$ xinput list
â¡ Virtual core pointer id=2 [master pointer (3)]
â â³ Virtual core XTEST pointer id=4 [slave pointer
(2)]
â â³ SynPS/2 Synaptics TouchPad id=11 [slave pointer
(2)]
⣠Virtual core keyboard id=3 [master keyboard (2)]
â³ Virtual core XTEST keyboard id=5 [slave
keyboard (3)]
â³ Power Button id=6 [slave
keyboard (3)]
â³ Video Bus id=7 [slave
keyboard (3)]
â³ Power Button id=8 [slave
keyboard (3)]
â³ USB HD Webcam: USB HD Webcam id=9 [slave
keyboard (3)]
â³ AT Translated Set 2 keyboard id=10 [slave
keyboard (3)]
â³ Panasonic Laptop Support id=12 [slave
keyboard (3)]
peplive@PepOS-Live:~$ xinput list-props 11
Device 'SynPS/2 Synaptics TouchPad':
Device Enabled (182): 1
Coordinate Transformation Matrix (184): 1.000000, 0.000000, 0.000000,
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Tapping Enabled (318): 1
libinput Tapping Enabled Default (319): 0
libinput Tapping Drag Enabled (320): 1
libinput Tapping Drag Enabled Default (321): 1
libinput Tapping Drag Lock Enabled (322): 0
libinput Tapping Drag Lock Enabled Default (323): 0
libinput Tapping Button Mapping Enabled (324): 1, 0
libinput Tapping Button Mapping Default (325): 1, 0
libinput Natural Scrolling Enabled (326): 0
libinput Natural Scrolling Enabled Default (327): 0
libinput Disable While Typing Enabled (328): 1
libinput Disable While Typing Enabled Default (329): 1
libinput Scroll Methods Available (330): 1, 1, 0
libinput Scroll Method Enabled (331): 1, 0, 0
libinput Scroll Method Enabled Default (332): 1, 0, 0
libinput Accel Speed (333): 0.000000
libinput Accel Speed Default (334): 0.000000
libinput Accel Profiles Available (335): 1, 1
libinput Accel Profile Enabled (336): 1, 0
libinput Accel Profile Enabled Default (337): 1, 0
libinput Left Handed Enabled (338): 0
libinput Left Handed Enabled Default (339): 0
libinput Send Events Modes Available (303): 1, 1
libinput Send Events Mode Enabled (304): 0, 0
libinput Send Events Mode Enabled Default (305): 0, 0
Device Node (306): "/dev/input/event5"
Device Product ID (307): 2, 7
libinput Drag Lock Buttons (340): <no items>
libinput Horizontal Scroll Enabled (341): 1
libinput Scrolling Pixel Distance (342): 15
libinput Scrolling Pixel Distance Default (343): 15
libinput High Resolution Wheel Scroll Enabled (344): 1
peplive@PepOS-Live:~$ xinput list-props 12
Device 'Panasonic Laptop Support':
Device Enabled (182): 1
Coordinate Transformation Matrix (184): 1.000000, 0.000000, 0.000000,
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Send Events Modes Available (303): 1, 0
libinput Send Events Mode Enabled (304): 0, 0
libinput Send Events Mode Enabled Default (305): 0, 0
Device Node (306): "/dev/input/event6"
Device Product ID (307): 1, 1
peplive@PepOS-Live:~$
pgpPTJsQOFTN9.pgp
Description: OpenPGP digital signature
