[quoted lines by Felix Grützmacher - Handy Tech Elektronik GmbH on 2016/07/12 at 10:20 +0200]
>brltty.exe: USB: testing device: vendor=1FE4 product=0054 >brltty.exe: USB: setup packet: Typ:80 Req:06 Val:0300 Idx:0000 Len:00FF >brltty.exe: USB: control input: 04 03 09 04 >brltty.exe: USB: USB language: 409 ... >The vendor=1FE4 product=0054 is actually our device. It isn't detected >however. Yes, actually, it is as you can see above. When the log shows that it's testing a device, that's telling you that that's what it's about to do. The fact that it then starts to actually do things with the device means that it's recognized the vendor/product ID pair. Since this isn't a complete log, I can't tell a few things. In particular, what I'd like to know is if you've explicitly specified the ht driver or if you're having it autodetect. I'll look at the log further, but I figured I'd at least respond to this point right away. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
