Hello Dave,
I would have liked to post some logs, however the actions of brltty are
not fully predictable, at least not to me, so here are the speps I took:
1. tunr on fthe F40-new.
2. unlock phone (brltty started correctly)
3. Goto brltty->settings->manage devices->remove device, so I could
recreate it and log the connection.
4. When the device was removed, BRLTTY kept displaying info on the
display, something I didn't expect.
5. turn brltty off on is main screen.
6. recreate the device and try to make it the default (brltty stopped
messages started to appear)
7. Several useless attempts in which brltty always stopped.
8. Completely reboot the phone. (brltty no longer stopped, however there
was no braille either)
9. Remove all devices from the bluetooth screen and pair the F40-new again.
10. No luck, so reboot the phone again.
11. brltty started giving me (cannot connect to 'focus 40 bt' messages
with pairing requests from the display.
12. Turn brltty off and entered the 0000 code again.
13. Turn brltty on and it instantly started doing what it should do...
So: I am happy brltty is working again as expected. Currently the
F40-new is autodetected, so that issue has resolved itself as well.
All the above was on the Nexus 5. I will try a cold reboot of the Nexus
4 this evening.
With kind regards,
Henk.
On 3/4/2014 10:06 PM, Dave Mielke wrote:
[quoted lines by Henk Abma on 2014/03/04 at 21:35 +0100]
when I first performed the 'add device' option, I only changed the
name for the display and left the rest unchanged. When this didn't
workk, I changed the driver from auto-detect to Freedom Scientific.
This was for the new Focus 40. For the classic Focus 40 I could leave
the driver on auto-connect.
Would you be able to go into the log categories screen to turn on both Input
Packets and Output Packets, and then capture a log of the autodetect failure? A
matching log capturing the successful autodetection of the older device would
be nice to have as well.
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
