[quoted lines by Henk Abma on 2014/03/04 at 21:35 +0100] >when I first performed the 'add device' option, I only changed the >name for the display and left the rest unchanged. When this didn't >workk, I changed the driver from auto-detect to Freedom Scientific. > >This was for the new Focus 40. For the classic Focus 40 I could leave >the driver on auto-connect.
Would you be able to go into the log categories screen to turn on both Input Packets and Output Packets, and then capture a log of the autodetect failure? A matching log capturing the successful autodetection of the older device would be nice to have as well. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.com/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
