hello mike
that is what happens
no forwarded email to read just a blank text box
Yvonne
----- Original Message ----- From: "Mike & Barbara In Arcadia" <[email protected]>
To: <[email protected]>
Sent: Monday, January 03, 2011 3:44 PM
Subject: Re: [Blind-Computing] message rules


Hi Yvonne;

When you press control + F, to forward an email, you are in the header
fields.  You fill these in, then tab down to the edit field where the
message is. If there isn't a message in the edit field then, who knows what
happened!  Take care.
Mike
----- Original Message ----- From: yvonne oliver
 To: [email protected]
 Sent: Monday, January 03, 2011 7:13 AM
 Subject: Re: [Blind-Computing] message rules


 ok thanks
 but i discovered something not noticed until now
 when i forward an email from another person all i get is a blank email
 no body of the text
 for example i forwarded one from a friend of mine to my inbox
 when i heard jaws say new email i looked and it said from carol
 when i opened it to read it all that was there was my name that i use to
 send emails after i finishes typing the email
 there was no text to read
 no idea why this is but it only noticed recently today
 Yvonne
----- Original Message ----- From: "Mike & Barbara In Arcadia" <[email protected]>
 To: <[email protected]>
 Sent: Monday, January 03, 2011 2:54 PM
 Subject: Re: [Blind-Computing] message rules


 > Hi Yvonne;
 >
 > You don't need to put anything in the " To " field.  As long you put 1
or
 > more people in the CC Or Bcc field there doesn't need to be anything in
 > the
 > " To " field.  The email just needs to have somebody to be sent to in 1
of
 > the fields.  Take care.
 > Mike
 >
> ----- Original Message ----- > From: yvonne oliver
 >  To: [email protected]
 >  Sent: Monday, January 03, 2011 5:13 AM
 >  Subject: Re: [Blind-Computing] message rules
 >
 >
 >  hi mike
 >  i will give this a go but who or what do i put in the to field
 >  Yvonne
> ----- Original Message ----- > From: "Mike & Barbara In Arcadia" <[email protected]>
 >  To: <[email protected]>
 >  Sent: Monday, January 03, 2011 1:03 PM
 >  Subject: Re: [Blind-Computing] message rules
 >
 >
 >  > HI Yvonne;
 >  >
 >  > The computer / OE program does that you for you whenever you use the
 > BCC
 >  > field to send your messages.  Try this: The next time you send a
 > message
 >  > include yourself in the BCC field & when you recieve the email, open
it
 > &
 >  > you will see what I mean.  Take care.
 >  > Mike
 >  >
> > ----- Original Message ----- > > From: yvonne oliver
 >  >  To: [email protected]
 >  >  Sent: Monday, January 03, 2011 4:54 AM
 >  >  Subject: Re: [Blind-Computing] message rules
 >  >
 >  >
 >  >  hi mike
 >  >  thank you for this
 >  >  i will save it for future use
 >  >  however the bit i meant was to be able to forward an email that has
 >  > several
 >  >  email addresses already in it.
 >  >  this is where people including me have just sent the email and not
 >  > removed
 >  >  those other email addresses.
 >  >  by adding "undisclosed recipient to the people in the address book
 > makes
 >  > it
 >  >  better when forwarding emails because it is supposed to remove all
the
> > previous addresses and only leave the last one which would of course
 > be
 >  >  mine.
 >  >  but how do i add the words undisclosed recipient to each of the
 > contacts
 >  > i
 >  >  wish to forward emails to?
 >  >  thank you
 >  >  Yvonne
> > ----- Original Message ----- > > From: "Mike & Barbara In Arcadia" <[email protected]>
 >  >  To: <[email protected]>
 >  >  Sent: Monday, January 03, 2011 12:38 PM
 >  >  Subject: Re: [Blind-Computing] message rules
 >  >
 >  >
 >  >  > Hi Yvonne;
 >  >  >
 >  >  > You want to put all recipients in the " BCC " field for
undisclosed
> > > recipients to be displayed. Since I send %95 of email via the BCC
 >  > field
 >  >  > here is how I do it.
 >  >  > 1. Create a new email with control +N or, highlight the email you
 > would
 >  >  > like
 >  >  > to forward & press control + F.
 >  >  >
 >  >  > 2. Tab down to the BCC field.  If the BCC field isn't showing
press
 > Alt
 >  > +
 >  >  > v,
 >  >  > for the view menu, & make sure that the All Headers option is
 > checked.
 >  > If
 >  >  > it isn't press enter on it to check it & pressing enter will also
 > take
 >  > you
 >  >  > out of the menus.  Reminder, you have to have an email open to
find
 > the
 >  >  > All
 >  >  > Headers option in the view menu.
 >  >  >
 >  >  > 3. Press Alt + T, for tools, press R, for recipients, & tab 3
times
 > to
 >  > the
 >  >  > address book list.
 >  >  >
 >  >  > 4. Arrow down or, use first letter navigation, through the list
and
 > for
 >  >  > each
 >  >  > person you want to send this email to, press the keystroke, Alt +
B,
 > on
 >  >  > each
 >  >  > name you want to send the email to.
 >  >  >
> > > 5. When you have entered all the names you need, tab several times
 > to
 >  > the
 >  >  > BCC list & arrow down to see if you got everybody.  If you have
 >  > included
 >  >  > everybody
 >  >  > you want, tab to the Okay button and press enter.
 >  >  >
 >  >  > 6. Now, tab to the subject field, enter your subject, tab to the
 > edit
 >  >  > field,
 >  >  > put in your message, & send as usual.
 >  >  >
 >  >  > If you want to use the " To " or " CC " field instead, do steps 1
&
 > 2
 >  > but,
 >  >  > on each name you want to enter press Alt + T, or Alt + C, for the
To
 > &
 >  > CC
 >  >  > fields
 >  >  > respectively.  Then tab to the To or CC list, checkthe names, tab
to
 >  > Okay,
 >  >  > &
 >  >  > press enter.  Then follow step 6 from above.
 >  >  >
 >  >  > Hope this helps.  Take care.
 >  >  >
 >  >  > Mike
> > > ----- Original Message ----- > > > From: yvonne oliver
 >  >  >  To: [email protected]
 >  >  >  Sent: Monday, January 03, 2011 2:45 AM
 >  >  >  Subject: Re: [Blind-Computing] message rules
 >  >  >
 >  >  >
 >  >  >  hi
 >  >  >  i just looked at that and it seems very good
 >  >  >  apart from having to go past all the advertising junk.
 >  >  >  i did one of these by asking the following in Google
 >  >  >  how to send using undisclosed recipients
 >  >  >  it told me how to do this but i am not sure of one part
> > > it says about adding the term undisclosed recipients to people in
 > the
 >  >  >  address book
 >  >  >  first and last name apparently will allow the sender to normally
 > type
 >  > in
 >  >  >  people from the address book using the bcc field.
 >  >  >  the bit i am stuck on is
 >  >  >  how do i add undisclosed recipients to people in the address
book?
 >  >  >  do i have to type their name in again so that i have 2 people
with
 > the
 >  >  > same
 >  >  >  details?
 >  >  >  or can someone provide me with a step guide on how to add
 > undisclosed
 >  >  >  recipients to people in my address book
 >  >  >  but i must say i never knew their was a quicker way of finding
this
 >  > out
 >  >  > for
 >  >  >  example until now i would of typed  this in a rather long winded
 > way
 >  >  >  Yvonne
> > > ----- Original Message ----- > > > From: "Andre Williams" <[email protected]>
 >  >  >  To: <[email protected]>
 >  >  >  Sent: Sunday, January 02, 2011 8:48 PM
 >  >  >  Subject: Re: [Blind-Computing] message rules
 >  >  >
 >  >  >
 >  >  >  > Because I feel really bad for Mike taking so much time out of
his
 >  > life
 >  >  > to
 >  >  >  > repeatedly answer these questions, I ran a 3 second Google
search
 >  > using
 >  >  >  > this
 >  >  >  > question:
 >  >  >  > How to backup message rules in Outlook Express?
 >  >  >  >
 >  >  >  > and I got this as the first hit:
 >  >  >  > http://www.pchell.com/support/backupoe.shtml
 >  >  >  >
 >  >  >  > There are of course many thousands of other solutions a quick
 > basic
 >  >  > Google
 >  >  >  > search away. I'm not trying to tell anyone what to do by any
 > means,
 >  > I'm
 >  >  >  > just
 >  >  >  > making a suggestion that will help one find their answer much
 > faster
 >  >  > than
 >  >  >  > posting as well as giving those who answer their personal time
 > back.
 >  >  >  >
 >  >  >  > Andre
 >  >  >  >
> > > > ----- Original Message ----- > > > > From: "Mike & Barbara In Arcadia" <[email protected]>
 >  >  >  > To: <[email protected]>
 >  >  >  > Sent: Sunday, January 02, 2011 12:20 PM
 >  >  >  > Subject: Re: [Blind-Computing] message rules
 >  >  >  >
 >  >  >  >
 >  >  >  > Hi Yvonne;
 >  >  >  >
 >  >  >  > Look in your delete folder or the Recycle Bin.  If it's in the
 >  > Recycle
 >  >  >  > Bin,
 >  >  >  > select / highlight it, press the applications key, arrow to
 > restore,
 >  > &
 >  >  >  > press
 >  >  >  > enter.  If you don't find it anywhere you can try making a new
 >  > folder,
 >  >  > if
 >  >  >  > you remember exactly how the old one was named, & make sure it
is
 >  >  > placed
 >  >  >  > in
 >  >  >  > the Local Folders list.  Hope this helps.  Take care.
 >  >  >  > Mike
 >  >  >  >
> > > > ----- Original Message ----- > > > > From: yvonne oliver
 >  >  >  >  To: blind-computing
 >  >  >  >  Sent: Sunday, January 02, 2011 9:05 AM
 >  >  >  >  Subject: [Blind-Computing] message rules
 >  >  >  >
 >  >  >  >
 >  >  >  >  hi
 >  >  >  >  somehow i deleted the folder that had message rules set up.
 >  >  >  >  now they go to my inbox.
 >  >  >  >  how and where would i find the folder and how can i get it
back
 > in
 >  > to
 >  >  > the
 >  >  >  > list of other folders that remain untouched.
 >  >  >  >  thank you
 >  >  >  >  Yvonne
 >  >  >  >  For answers to frequently asked questions about this list
visit:
 >  >  >  >  http://www.jaws-users.com/help/
 >  >  >  >  Send any questions regarding list management to:
 >  >  >  >  [email protected]
 >  >  >  > For answers to frequently asked questions about this list
visit:
 >  >  >  > http://www.jaws-users.com/help/
 >  >  >  > Send any questions regarding list management to:
 >  >  >  > [email protected]
 >  >  >  >
 >  >  >  >
 >  >  >  > For answers to frequently asked questions about this list
visit:
 >  >  >  > http://www.jaws-users.com/help/
 >  >  >  > Send any questions regarding list management to:
 >  >  >  > [email protected]
 >  >  >
 >  >  >
 >  >  >  For answers to frequently asked questions about this list visit:
 >  >  >  http://www.jaws-users.com/help/
 >  >  >  Send any questions regarding list management to:
 >  >  >  [email protected]
 >  >  > For answers to frequently asked questions about this list visit:
 >  >  > http://www.jaws-users.com/help/
 >  >  > Send any questions regarding list management to:
 >  >  > [email protected]
 >  >
 >  >
 >  >  For answers to frequently asked questions about this list visit:
 >  >  http://www.jaws-users.com/help/
 >  >  Send any questions regarding list management to:
 >  >  [email protected]
 >  > For answers to frequently asked questions about this list visit:
 >  > http://www.jaws-users.com/help/
 >  > Send any questions regarding list management to:
 >  > [email protected]
 >
 >
 >  For answers to frequently asked questions about this list visit:
 >  http://www.jaws-users.com/help/
 >  Send any questions regarding list management to:
 >  [email protected]
 > For answers to frequently asked questions about this list visit:
 > http://www.jaws-users.com/help/
 > Send any questions regarding list management to:
 > [email protected]


 For answers to frequently asked questions about this list visit:
 http://www.jaws-users.com/help/
 Send any questions regarding list management to:
 [email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]

Reply via email to