Following the example at https://github.com/BIRD/bird/
blob/v2.0.2/doc/bird.conf.example2, I set up a simple bird config (see
below).
It is working, but I am not certain what the '---' in the table column of
the output of `show protocols` means. I expected the column to display
vpntab4.
$ sudo /usr/local/sbin/birdc show protocols
BIRD v2.0.2 ready.
Name Proto Table State Since Info
peer1 BGP --- up 17:14:48.474 Established
The output of `show route count` shows that there are routes in table
vpntab4:
$ sudo /usr/local/sbin/birdc show route count
BIRD v2.0.2 ready.
0 of 0 routes for 0 networks in table master4
0 of 0 routes for 0 networks in table master6
9581 of 9581 routes for 9581 networks in table vpntab4
Total: 9581 of 9581 routes for 9581 networks in 3 tables
The contents of my bird.conf:
log syslog { debug, trace, info, remote, warning, error, auth, fatal, bug };
log stderr all;
router id 127.0.0.1;
vpn4 table vpntab4;
protocol bgp peer1 {
local as 65321;
neighbor 192.168.1.1 as 65321;
hold time 180;
vpn4 mpls {
import all;
};
}
Thanks,
--
Chris Herdt
https://osric.com/chris/
