Thanks for the clarification! I confirmed that I see the specified
protocols using `show protocol all`:
With ipv4 and ipv6 tables added explicitly:
... [preceding lines] ...
Local capabilities
Multiprotocol
AF announced: ipv4 vpn4-mpls ipv6
... [following lines] ...
With just the vpn4 mpls table:
... [preceding lines] ...
Local capabilities
Multiprotocol
AF announced: vpn4-mpls
... [following lines] ...
I'll follow up with the bird-lg contributors, it's possible that it's not
ready to handle the output from BIRD 2 for multi-table protocols.
On Wed, Aug 8, 2018 at 6:26 AM Ondrej Zajicek <santi...@crfreenet.org>
wrote:
> On Mon, Aug 06, 2018 at 11:34:16AM -0500, Chris Herdt wrote:
> > Following the example at https://github.com/BIRD/bird/
> > blob/v2.0.2/doc/bird.conf.example2, I set up a simple bird config (see
> > below).
> >
> > It is working, but I am not certain what the '---' in the table column of
> > the output of `show protocols` means. I expected the column to display
> > vpntab4.
>
> Hi
>
> BGP in BIRD 2 is generally a multi-table protocol (although you use just
> one channel / one table) and because of that associated table is not shown
> in 'show protocol'. You will see it in 'show protocol all'.
>
> --
> Elen sila lumenn' omentielvo
>
> Ondrej 'Santiago' Zajicek (email: santi...@crfreenet.org)
> OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
> "To err is human -- to blame it on a computer is even more so."
>
--
Chris Herdt
https://osric.com/chris/
