On Tue, Apr 03, 2018 at 09:23:34AM +0200, dawid k wrote: > ip addr list: > server: > > eth0, lo and > 5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 100 > link/[65534] > inet 10.29.0.1 peer 10.29.0.2/32 scope global tun0 > > client: > > 977: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast qlen 100 > link/[65534] > inet 10.29.0.6 peer 10.29.0.5/32 scope global tun0 > valid_lft forever preferred_lft forever
> Now i'm trying to establish ptp-connection for ospf, but in future the > server should run in ptmp mode. I suppose, that there is somethnig wrong > with the IP-Address of peer, since the server has IP-Address 10.29.0.1 and > the client 10.29.0.10. But I declared these IP-Adresses as neighbour in > config file. Maybe there is an issue, that the IP-Addresses are in > /32-network? Yes, that is the issue. BIRD OSPFv2 works really on per-ip-range basis instead of per-iface. So if you have 10.29.0.2/32 range on tun0, then incoming packets outside of 10.29.0.2/32 are ignored. You could use /32 network, but it must be matching (10.29.0.2 peer 10.29.0.1/32 on the client). Option 'neighbors' in config file works only with NBMA or PtMP iface types, is ignored otherwise. -- Elen sila lumenn' omentielvo Ondrej 'Santiago' Zajicek (email: santi...@crfreenet.org) OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) "To err is human -- to blame it on a computer is even more so."
