Here my configuration (client):
ifconfig tun0:
tun0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.29.0.10 P-t-P:10.29.0.9 Mask:255.255.255.255
bird_ospf.conf (included in bird.conf) :
protocol ospf myOSPF {
area 0.0.0.0 {
interface "tun0" {
cost 10;
type ptp;
stub no; hello 10; transmit delay 5; wait 10; dead
40;
neighbors {
10.29.0.1;
}; }; };
tcpdump -v -XX proto ospf -i tun0 (confirmation, that hello messages are
sent and received) :
12:59:03.143238 IP (tos 0xc0, ttl 1, id 15765, offset 0, flags [none],
proto OSPF (89), length 64)
10.29.0.01 > 224.0.0.5: OSPFv2, Hello, length 44
...
12:59:09.157965 IP (tos 0xc0, ttl 1, id 59599, offset 0, flags [none],
proto OSPF (89), length 64)
10.29.0.10 > 224.0.0.5: OSPFv2, Hello, length 44
The server is using similar configuration. It differs only by IP(10.29.0.1)
and router-ID.
2018-03-29 13:37 GMT+02:00 dawid k <tookie009smi...@gmail.com>:
> I'm trying to set up pretty simply configuration consisting of two linux
> machines connected over tun-interface created by OpenVPN.
>
> The VPN-connection is working fine - I can send data over this interface.
> Now I installed bird and configured ospf on both devices. I can see that
> both bird instances are sending hello packets on tun-interface however no
> one of them is getting the message.
>
> I can see with tcpdump, that every device is getting the hello-message.
> However they are not forwarded to bird or bird just ignores them.
>
> I tried my setup over cabel with eth0-interface and everything is working
> fine. Right now every machine is advertising just one example static
> network. I will focus on correct advertising later after I connect those
> two instances.
>
> The tun0 interface is working in type ptp and the netmask is
> 255.255.255.255. Do you have any idea what's wrong?
>
> Thanks for every input, tookie009
>
