Also Working with a BSP http://www.qnx.com/developers/docs/6.5.0SP1.update/com.qnx.doc.neutrino_building/bsp.html
On Thursday, 4 March 2021 at 17:09:40 UTC lazarman wrote: > The read me for the BSP zip files you attached go look at it > It says it's a QNX 6.50 BSP. > See if you can get the latest BSP 7.0 > > > Sent from Yahoo Mail on Android > <https://overview.mail.yahoo.com/mobile/?.src=Android> > > On Thu, Mar 4, 2021 at 10:49 AM, Lucas SOLDA > <lucas...@gmail.com> wrote: > > I think the guide refers to this : > http://www.qnx.com/developers/docs/6.6.0.update/#com.qnx.doc.bsp_update.guide/topic/bsp_660_structure.html > > Le jeudi 4 mars 2021 à 17:16:54 UTC+1, lazarman a écrit : > > The BSP pdf you sent references another BSP user's guide can you find it? > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Thu, Mar 4, 2021 at 1:20 AM, Lucas SOLDA > <lucas...@gmail.com> wrote: > > Yes I entered these commands in u-boot, I could have automated them but I > prefer to write them for the moment. > > "In theory if you have a license BUT > some RTOS companies dont supply BSP source code unless you paid fees > > So do you need to modify BSP" > > Yes in theory I agree. I will need to modify the BSP because I want > Isagraf so I have to install the drivers (to make the beaglebone black a > target I can load through IsaGraf) > > In fact I'm very lost with all of these things > Le mercredi 3 mars 2021 à 19:50:58 UTC+1, lazarman a écrit : > > These commands you entered are where? uboot? > > --> fatload mmc 0 0x81000000 prebuilt-bsp-ti-beaglebone.ifs > --> go 0x81000000 > > Why not automate these commands ? > > <<<if I compile the BSP without modifying anything, I should get the > prebuilt image, right ? > > In theory if you have a license BUT > some RTOS companies dont supply BSP source code unless you paid fees > > So do you need to modify BSP> > > > > On Wednesday, March 3, 2021, 09:03:22 AM CST, Lucas SOLDA < > lucas...@gmail.com> wrote: > > > Mark, > > I have a BeagleBone Black REV C. > There was nothing on the SD before. I did not touch to the EMC so I think > there is nothing inside. > My company has a QNX 6.5.0 SP1 licence and here is the list of the tools > installed on my computer: > > [image: 1.png] > [image: 2.jpg] > > First, I formated my SD card in FAT32, I made it active by using diskpart > and I copied the MLO and then the u-boot files. I took them from here : > https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone > Bootloader modules# > <https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone#section-TiAm335Beaglebone-BootloaderModules> > --> > *"Click here > <http://community.qnx.com/sf/frs/do/viewRelease/projects.bsp/frs.texas_instruments_am335_beaglebo.mlo_and_u_boot_binaries_for_beag> > to > download the MLO and u-boot binaries for the new Beaglebone Black platform. > "* > > After that, I downloaded the BSP files: QNX Neutrino 6.5.0 SP1# > <https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone#section-TiAm335Beaglebone-QNXNeutrino6.5.0SP1> > --> *Download *Project Downloads > <http://community.qnx.com/sf/frs/do/viewRelease/projects.bsp/frs.texas_instruments_am335_beaglebo.qnx_650_bsp_beaglebone_1_00_zip> > --> bsp-nto650-ti-beaglebone-sp1-trunk-201209071340.zip > <https://community.qnx.com/sf/frs/do/downloadFile/projects.bsp/frs.texas_instruments_am335_beaglebo.qnx_650_bsp_beaglebone_1_00_zip/frs36857?dl=1> > (I attach MLO, u-boot and BSP to this mail) > After extracting, I copied the file "prebuilt-bsp-ti-beaglebone.ifs" in > the "image" folder to my sdcard and I could succesfully launch QNX on my > BBB by typing these commands : > --> fatload mmc 0 0x81000000 prebuilt-bsp-ti-beaglebone.ifs > --> go 0x81000000 > > That worked perfectly. > > When I try to compile the image by myself it gets complicated. > > if I compile the BSP without modifying anything, I should get the prebuilt > image, right ? > The problem is that, when I do that, I have the message I gave in the > first post and it says that I compile with QNX 6.5.0 and not with QNX 6.5.0 > SP1 (whereas it is installed). > > *"I'm guessing you have no support forum or no ones replying at QNX?" *I > don't have support anymore and the only thing the told me is that I don't > use QNX 6.5.0 SP1 > > I don't know what to do anymore and the QNX SDP is not on my computer so I > can't use it whenever I want > > Le mercredi 3 mars 2021 à 15:03:47 UTC+1, lazarman a écrit : > > Let's start with some history about what rev board you have , what was on > SD before and whats in the emc now and details about tools you installed > to build BSP and QNX and exactly the BSP file's you are compiling as well > as your goals. Are you trying to eventually modify the BSP source? > I'm guessing you have no support forum or no ones replying at QNX? > I need a clear picture of what you did exactly installing tools as in did > you install multiple times etc etc > > I'll look at the pdf you supplied and ponder whether it worthwhile and > practical to find my Beagleboard,Whites,blacks or even Pandaboard. > power supplies may be hard to match I've moved a lot. I guess a black > would be easy for me to find but may be in storage. > > Also maybe they will let me reeducate myself as I'm not working on a > commercial product and give me access otherwise it's harder to help. > > Hopefully I can get you on the right path > > Mark > > > Sent from Yahoo Mail on Android > <https://overview.mail.yahoo.com/mobile/?.src=Android> > > On Wed, Mar 3, 2021 at 1:15 AM, Lucas SOLDA > <lucas...@gmail.com> wrote: > I can send you the files if you don't have an account. > > I use the MLO and u-boot files for beaglebone black from this link : > "Click *here > <http://community.qnx.com/sf/frs/do/viewRelease/projects.bsp/frs.texas_instruments_am335_beaglebo.mlo_and_u_boot_binaries_for_beag>* > to > download the MLO and u-boot binaries for the new Beaglebone Black > platform.". > > The fact you pointed is troubling. I don't understand why the BSP is > unchanged between beagleboard and BBB. > > "*Perhaps if you disassemble the binary and look at the bone memory map > and the linker map and the u boot load address for QNX there's a mismatch * > *do you have access to BSP users guide? " * > > I will try to do that but I'm not an expert. I have access to the user > guide yes... > Le mercredi 3 mars 2021 à 08:09:38 UTC+1, Lucas SOLDA a écrit : > > @lazarman, in fact I'm not a student and I have a company account with a > QNX 6.5.0 SP1 licence. I have also already registered to the" QNX Software > Development Platform 6.5.x (registration)" link that you gave me. The > problem is not the fact that I can't download and install the SDP but the > fact that when I build the image thanks to the BSP, I don't have the same > result as the prebuilt image > > Le mercredi 3 mars 2021 à 00:24:34 UTC+1, lazarman a écrit : > > Hi Robert I think Lucas is saying he's only trying to build the BSP not > QNX. > > I did this 10 years ago and I also had the latest BSP guides I tried > getting these and you need a customer login. It says it's free for > education but again BlackBerry bought this. > > What's funny is this link below takes you to another page which says we > support these processors. It also says you should lose the latest version's > > QNX SDP 7.0 BSP for Texas Instruments AM335x (Beaglebone Black) > > > > > https://blackberry.qnx.com/en/support/qnx-board-support-packages > > Clicking on the above link next to the BSP you see another page saying > > > The QNX Software Center enables you to download and manage QNX Software > Development Platform version 7.x and related products. PDF documentation > and Licensing information relating to QNX SDP 7 and related products can > also be found here. *IMPORTANT: SDP 7.x licenses are initially delivered > within the myQNX License Manager > <https://www.qnx.com/account/dashboard/%22> and MUST be assigned to users > via the license manager in order for them to access the product.* > > And no code just a login. > > That BSP Lucas references is over 6 year's old. > > Even 10 year's ago you needed a valid company domain and email address for > QNX I know GreenHills and maybe WindRiver as well wouldn't even reply to a > free email domain and definitely won't give you a 30 day level license key > that the license manager needed > > Lucas is this for education 😉?? I know it's frustrating you might have to > reach out them about > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard...@googlegroups.com. > > To view this discussion on the web visit > > https://groups.google.com/d/msgid/beagleboard/0059314a-4779-4d14-90c4-72f26aa34996n%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/0059314a-4779-4d14-90c4-72f26aa34996n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard...@googlegroups.com. > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/beagleboard/3728398d-b6df-4a3d-a27c-110f6d3db85cn%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/3728398d-b6df-4a3d-a27c-110f6d3db85cn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard...@googlegroups.com. > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/beagleboard/ecde8e01-c662-4ff8-b7bf-36e146ad7f7an%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/ecde8e01-c662-4ff8-b7bf-36e146ad7f7an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/051d3d61-97a5-40eb-b209-35b3a6543e4bn%40googlegroups.com.
