It is a long time since I did any of this, so please forgive any errors and omissions.
You build a file system image from folders of existing (binary) components and folders of freshly created (binary) components. All guided by a script and/or configuration file. The build process will not build and replace existing components. I found it very difficult to know which version of component was in the file system image. IIRC, Any component specified by the script/configuration is search for in the: - existing folder -- left over rubbish? - QNX target folder -- correct PATH? - freshly created folder -- actually built? On Tuesday, 2 March 2021 at 07:25:37 UTC lucas...@gmail.com wrote: > The setup I use should be correct since this is the one provided by QNX > directly (MLO first, u-boot and image). Moreover, if my setup was > incorrect, the prebuilt image could not work. > > Yes i rebuilt all by following this > https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes > but > that does not work > Why does it say that I use QNX 6.5.0 (2010) whereas I compile with QNX > 6.5.0 SP1 (2012) ? I don't understand, we have been working on this for 3 > weeks > > Le lundi 1 mars 2021 à 19:07:16 UTC+1, robert.sty...@gmail.com a écrit : > >> I assumed you did rebuild all < >> https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes >> > >> >> On Monday, 1 March 2021 at 17:02:25 UTC lazarman wrote: >> >>> I remember sd card setup was important on Beagle board. your probably >>> following old or incorrect instructions. What was on this board could be >>> important. What instructions as well. >>> They used to have a forum before Blackberry bought them. >>> >>> >>> Sent from Yahoo Mail on Android >>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> >>> >>> On Mon, Mar 1, 2021 at 10:52 AM, robert.sty...@gmail.com >>> <robert.sty...@gmail.com> wrote: >>> >>> I vaguely remember the SP install being two manual steps, one being >>> copying files from one place to another >>> >>> On Monday, 1 March 2021 at 16:02:15 UTC lucas...@gmail.com wrote: >>> >>> Hello, >>> >>> I would like to use QNX on my BeagleBone Black. I have downloaded the QNX >>> Neutrino 6.5.0 SP1 BSP here: >>> >>> >>> https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone >>> >>> When I load the prebuilt image, it starts perfectly but when I try to >>> build the BSP by myself, I have this : >>> >>> *Jumping to QNX* >>> >>> *System page at phys:80011000 user:fc404000 kern:fc404000* >>> *Starting next program at vfe046604* >>> *cpu_startnext: cpu0 -> fe046604* >>> *VFPv3: fpsid=410330c3* >>> *coproc_attach(10): replacing fe07601c with fe0758bc* >>> *coproc_attach(11): replacing fe07601c with fe0758bc* >>> *Welcome to QNX Neutrino 6.5.0 SP1 on the Texas Instruments BeagleBone >>> (ARMv7 Cortex-A8 core) - Board* >>> >>> *Shutdown[0,0] S/C/F=11/1/11 C/D=fe01c68c/fe099ff4 state(c0)= now lock* >>> *QNX Version 6.5.0 Release 2010/07/09-14:26:46EDT* >>> *[0]PID-TID=1-6? P/T FL=00019001/05020000 "proc/boot/procnto-instr"* >>> *[0]ASPACE PID=2 PF=00008012* >>> *armle context[effe8f4c]:* >>> *0000: 8ffb2000 8ffb2000 8ffb2c01 00000181 effccbf8 01000000 00000000 >>> fc004000* >>> *0020: fc004000 effdf47c 01072fff 00000008 00000000 effe8f90 fe046878 >>> fe040e0c* >>> *0040: 60000013* >>> *instruction[fe040e0c]:* >>> *06 30 98 e7 1c 20 94 e5 11 00 12 e3 00 70 94 15 18 20 9d 15 07 70 82 11 >>> 0c 00* >>> *stack[effe8f90]:* >>> *0000: effe8fbc e18a1000 00000000 efffb348 effca00c 003fffff 00000a6e >>> e1988160* >>> *0020: 8ffb2000 fffff000 00000000 00000007 00000040 effccbf8 fe099ff0 >>> 01000000* >>> *0040: 000000ff efff0090 00000073 0000008d effca6e8 fe044744 effccbf8 >>> fe044ad0* >>> *0060: efffb348 fe069bac efffb348 fe071e30 effe9018 00000000 00000000 >>> 00000000ÿ* >>> >>> >>> As we can see, I have this message : *QNX Version 6.5.0 Release >>> 2010/07/09-14:26:46EDT* >>> This means that I try to compile with QNX 6.5.0 and not QNX 6.5.0 SP1. I >>> don't understand why i have this message because I have well installed QNX >>> 6.5.0 SP1 : >>> [image: 1.png] >>> >>> [image: 2.jpg] >>> Do I miss something ? Do I have to activate someting somewhere ? >>> >>> Thank you for your help. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4d7cb1d3-78ab-4f57-b58d-b5ea462b96fan%40googlegroups.com.
