I vaguely remember the SP install being two manual steps, one being copying files from one place to another
On Monday, 1 March 2021 at 16:02:15 UTC lucas...@gmail.com wrote: > Hello, > > I would like to use QNX on my BeagleBone Black. I have downloaded the QNX > Neutrino 6.5.0 SP1 BSP here: > > > https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone > > When I load the prebuilt image, it starts perfectly but when I try to > build the BSP by myself, I have this : > > *Jumping to QNX* > > *System page at phys:80011000 user:fc404000 kern:fc404000* > *Starting next program at vfe046604* > *cpu_startnext: cpu0 -> fe046604* > *VFPv3: fpsid=410330c3* > *coproc_attach(10): replacing fe07601c with fe0758bc* > *coproc_attach(11): replacing fe07601c with fe0758bc* > *Welcome to QNX Neutrino 6.5.0 SP1 on the Texas Instruments BeagleBone > (ARMv7 Cortex-A8 core) - Board* > > *Shutdown[0,0] S/C/F=11/1/11 C/D=fe01c68c/fe099ff4 state(c0)= now lock* > *QNX Version 6.5.0 Release 2010/07/09-14:26:46EDT* > *[0]PID-TID=1-6? P/T FL=00019001/05020000 "proc/boot/procnto-instr"* > *[0]ASPACE PID=2 PF=00008012* > *armle context[effe8f4c]:* > *0000: 8ffb2000 8ffb2000 8ffb2c01 00000181 effccbf8 01000000 00000000 > fc004000* > *0020: fc004000 effdf47c 01072fff 00000008 00000000 effe8f90 fe046878 > fe040e0c* > *0040: 60000013* > *instruction[fe040e0c]:* > *06 30 98 e7 1c 20 94 e5 11 00 12 e3 00 70 94 15 18 20 9d 15 07 70 82 11 > 0c 00* > *stack[effe8f90]:* > *0000: effe8fbc e18a1000 00000000 efffb348 effca00c 003fffff 00000a6e > e1988160* > *0020: 8ffb2000 fffff000 00000000 00000007 00000040 effccbf8 fe099ff0 > 01000000* > *0040: 000000ff efff0090 00000073 0000008d effca6e8 fe044744 effccbf8 > fe044ad0* > *0060: efffb348 fe069bac efffb348 fe071e30 effe9018 00000000 00000000 > 00000000ΓΏ* > > > As we can see, I have this message : *QNX Version 6.5.0 Release > 2010/07/09-14:26:46EDT* > This means that I try to compile with QNX 6.5.0 and not QNX 6.5.0 SP1. I > don't understand why i have this message because I have well installed QNX > 6.5.0 SP1 : > [image: 1.png] > > [image: 2.jpg] > Do I miss something ? Do I have to activate someting somewhere ? > > Thank you for your help. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com.
