Thanks Kern! I will dig deeper in documentation. First I try setup heartbeat in SD's config!
On Mon, Nov 26, 2018 at 11:33 AM Kern Sibbald <k...@sibbald.com> wrote: > Oh there are at least five different places to setup Heart Beat Interval > (Dir, SD, and FD). Unfortunately my memory is not good enough to remember > them all. Please ask others or see the documentation ... > > The easiest way is to get on a current version -- e.g. 9.2.2 where it is > done by defaut. > > Best regards, > Kern > > On 11/26/18 11:13 AM, Andras Horvai wrote: > > Hello Kern, > > yes you are right I am using bacula 7.0.5 shipped with Ubuntu 16.04. > Where should I setup heartbeat interval? On SD's or FD's config? Or both? > > Thanks for your help! > > Andras > > On Mon, Nov 26, 2018 at 10:56 AM Kern Sibbald <k...@sibbald.com> wrote: > >> Hello, >> >> If I remember right you are running on a *very* old Bacula, and the >> problem seems to be that the backup takes more than 2 hours. One of your >> comm lines (SD <-> FD) times out. I mention your old version because newer >> Bacula's automatically fix this problem by turning on Heart Beat Interval = >> 300, which is very likely to resolve your problem. >> >> Best regards, >> Kern >> >> On 11/26/18 10:34 AM, Andras Horvai wrote: >> >> Hi Tilman, >> >> thank you for your answer! But unfortunately the firewall cannot be a >> problem here :) >> The problem happens only with Copy Jobs. The SD and the FD is on the same >> device. There is no firewall on the machine. >> So what I am doing is the following: >> >> during weekend I do full backup with the backup server to file storage on >> the backup server. Then starting from Monday I am doing Copy Job from the >> backup >> server to a Tape device connected to the backup server. This works pretty >> well till Tape does not get full. When Tape gets full bacula asks for >> another tape. >> We replace the tape, so job would continue (as expected) but then at the >> end we got the job error... So I am puzzled what is wrong. >> >> Please feel free to share your ideas... >> >> Thanks, >> >> Andras >> >> On Sun, Nov 25, 2018 at 10:28 PM Tilman Schmidt <til...@imap.cc> >> <til...@imap.cc> wrote: >> >>> Hi Andras, >>> >>> is there a firewall between the client and the SD? >>> The message >>> >>> > 20-Nov 12:25 backup-sd JobId 4845: Fatal error: append.c:223 Network >>> error reading from FD. ERR=Connection reset by peer >>> >>> looks suspiciously like a firewall killing the FD - SD connection >>> because it sees it as idle. >>> >>> HTH >>> Tilman >>> >>> Am 22.11.2018 um 16:04 schrieb Andras Horvai: >>> > Dear list, >>> > >>> > I have to following problem: >>> > We use copy jobs to copy weekly full backups to WORM tape but when a >>> tape >>> > gets filled and needs to change the copy job failed. Bacula says >>> > intervention is >>> > needed so we put a new tape in the tape drive. What can be the problem? >>> > >>> > Copy job report: >>> > 20-Nov 12:25 backup-sd JobId 4838: End of Volume at file 0 on device >>> > "FileStorage" (/backup), Volume "FILEW-0542" >>> > 20-Nov 12:25 backup-sd JobId 4838: End of all volumes. >>> > 20-Nov 12:25 backup-sd JobId 4838: Elapsed time=02:45:29, Transfer >>> > rate=42.14 M Bytes/second >>> > 20-Nov 12:25 backup1 JobId 4838: Error: Bacula backup1 7.0.5 (28Jul14): >>> > Build OS: x86_64-pc-linux-gnu ubuntu 16.04 >>> > Prev Backup JobId: 4837 >>> > Prev Backup Job: db1-job.2018-11-19_23.09.19_03 >>> > New Backup JobId: 4845 >>> > Current JobId: 4838 >>> > Current Job: Archive.2018-11-20_07.59.53_05 >>> > Backup Level: Full >>> > Client: None >>> > FileSet: "None" 2017-06-19 09:00:00 >>> > Read Pool: "ServersWeeklyFullFile" (From Job resource) >>> > Read Storage: "File" (From Pool resource) >>> > Write Pool: "TapeArchive" (From Pool's NextPool resource) >>> > Write Storage: "LTO-4" 20-Nov 09:39 backup1 JobId 4845: >>> Using >>> > Device "LTO-4" to write. >>> > 20-Nov 12:01 backup-sd JobId 4845: End of Volume "WORMW-1242" at >>> > 386:27137 on device "LTO-4" (/dev/nst0). Write of 64512 bytes got -1. >>> > 20-Nov 12:01 backup-sd JobId 4845: Re-read of last block succeeded. >>> > 20-Nov 12:01 backup-sd JobId 4845: End of medium on Volume "WORMW-1242" >>> > Bytes=764,853,046,272 Blocks=11,855,980 at 20-Nov-2018 12:01. >>> > 20-Nov 12:01 backup1 JobId 4845: Created new Volume="WORMW-1243", >>> > Pool="TapeArchive", MediaType="LTO-4" in catalog. >>> > 20-Nov 12:01 backup-sd JobId 4845: Please mount append Volume >>> > "WORMW-1243" or label a new one for: >>> > Job: db1-job.2018-11-20_07.59.54_12 >>> > Storage: "LTO-4" (/dev/nst0) >>> > Pool: TapeArchive >>> > Media type: LTO-4 >>> > 20-Nov 12:15 backup-sd JobId 4845: Error: The Volume=WORMW-1243 on >>> > device="LTO-4" (/dev/nst0) appears to be unlabeled. >>> > 20-Nov 12:15 backup-sd JobId 4845: Labeled new Volume "WORMW-1243" on >>> > tape device "LTO-4" (/dev/nst0). >>> > 20-Nov 12:15 backup-sd JobId 4845: Wrote label to prelabeled Volume >>> > "WORMW-1243" on tape device "LTO-4" (/dev/nst0) >>> > 20-Nov 12:15 backup-sd JobId 4845: New volume "WORMW-1243" mounted on >>> > device "LTO-4" (/dev/nst0) at 20-Nov-2018 12:15. >>> > 20-Nov 12:25 backup-sd JobId 4845: Fatal error: append.c:223 Network >>> > error reading from FD. ERR=Connection reset by peer >>> > 20-Nov 12:25 backup-sd JobId 4845: Elapsed time=02:31:15, Transfer >>> > rate=46.11 M Bytes/second >>> > (From Pool's NextPool resource) >>> > Catalog: "MyCatalog" (From Client resource) >>> > Start time: 20-Nov-2018 09:39:31 >>> > End time: 20-Nov-2018 12:25:04 >>> > Elapsed time: 2 hours 45 mins 33 secs >>> > Priority: 13 >>> > SD Files Written: 4,792 >>> > SD Bytes Written: 418,488,802,122 (418.4 GB) >>> > Rate: 42131.2 KB/s >>> > Volume name(s): WORMW-1242|WORMW-1243 >>> > Volume Session Id: 9 >>> > Volume Session Time: 1542631131 >>> > Last Volume Bytes: 33,060,787,200 (33.06 GB) >>> > SD Errors: 0 >>> > SD termination status: OK >>> > Termination: *** Copying Error *** >>> > >>> > Regarding copy jobs the FD and the SD are on the same machine. >>> > >>> > we are using: >>> > >>> > Distributor ID: Ubuntu >>> > Description: Ubuntu 16.04.4 LTS >>> > Release: 16.04 >>> > Codename: xenial >>> > >>> > bacula 7.0.5 >>> > >>> > Tape drive: HP Ultrium 4-SCSI >>> > >>> > >>> > Thanks for help, >>> > >>> > Andras >>> > >>> >>> >>> _______________________________________________ >>> Bacula-users mailing list >>> Bacula-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>> >> >> >> _______________________________________________ >> Bacula-users mailing >> listBacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users >> >> >> > > _______________________________________________ > Bacula-users mailing > listBacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users > > >
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
