Hello Kern, yes you are right I am using bacula 7.0.5 shipped with Ubuntu 16.04. Where should I setup heartbeat interval? On SD's or FD's config? Or both?
Thanks for your help! Andras On Mon, Nov 26, 2018 at 10:56 AM Kern Sibbald <k...@sibbald.com> wrote: > Hello, > > If I remember right you are running on a *very* old Bacula, and the > problem seems to be that the backup takes more than 2 hours. One of your > comm lines (SD <-> FD) times out. I mention your old version because newer > Bacula's automatically fix this problem by turning on Heart Beat Interval = > 300, which is very likely to resolve your problem. > > Best regards, > Kern > > On 11/26/18 10:34 AM, Andras Horvai wrote: > > Hi Tilman, > > thank you for your answer! But unfortunately the firewall cannot be a > problem here :) > The problem happens only with Copy Jobs. The SD and the FD is on the same > device. There is no firewall on the machine. > So what I am doing is the following: > > during weekend I do full backup with the backup server to file storage on > the backup server. Then starting from Monday I am doing Copy Job from the > backup > server to a Tape device connected to the backup server. This works pretty > well till Tape does not get full. When Tape gets full bacula asks for > another tape. > We replace the tape, so job would continue (as expected) but then at the > end we got the job error... So I am puzzled what is wrong. > > Please feel free to share your ideas... > > Thanks, > > Andras > > On Sun, Nov 25, 2018 at 10:28 PM Tilman Schmidt <til...@imap.cc> > <til...@imap.cc> wrote: > >> Hi Andras, >> >> is there a firewall between the client and the SD? >> The message >> >> > 20-Nov 12:25 backup-sd JobId 4845: Fatal error: append.c:223 Network >> error reading from FD. ERR=Connection reset by peer >> >> looks suspiciously like a firewall killing the FD - SD connection >> because it sees it as idle. >> >> HTH >> Tilman >> >> Am 22.11.2018 um 16:04 schrieb Andras Horvai: >> > Dear list, >> > >> > I have to following problem: >> > We use copy jobs to copy weekly full backups to WORM tape but when a >> tape >> > gets filled and needs to change the copy job failed. Bacula says >> > intervention is >> > needed so we put a new tape in the tape drive. What can be the problem? >> > >> > Copy job report: >> > 20-Nov 12:25 backup-sd JobId 4838: End of Volume at file 0 on device >> > "FileStorage" (/backup), Volume "FILEW-0542" >> > 20-Nov 12:25 backup-sd JobId 4838: End of all volumes. >> > 20-Nov 12:25 backup-sd JobId 4838: Elapsed time=02:45:29, Transfer >> > rate=42.14 M Bytes/second >> > 20-Nov 12:25 backup1 JobId 4838: Error: Bacula backup1 7.0.5 (28Jul14): >> > Build OS: x86_64-pc-linux-gnu ubuntu 16.04 >> > Prev Backup JobId: 4837 >> > Prev Backup Job: db1-job.2018-11-19_23.09.19_03 >> > New Backup JobId: 4845 >> > Current JobId: 4838 >> > Current Job: Archive.2018-11-20_07.59.53_05 >> > Backup Level: Full >> > Client: None >> > FileSet: "None" 2017-06-19 09:00:00 >> > Read Pool: "ServersWeeklyFullFile" (From Job resource) >> > Read Storage: "File" (From Pool resource) >> > Write Pool: "TapeArchive" (From Pool's NextPool resource) >> > Write Storage: "LTO-4" 20-Nov 09:39 backup1 JobId 4845: Using >> > Device "LTO-4" to write. >> > 20-Nov 12:01 backup-sd JobId 4845: End of Volume "WORMW-1242" at >> > 386:27137 on device "LTO-4" (/dev/nst0). Write of 64512 bytes got -1. >> > 20-Nov 12:01 backup-sd JobId 4845: Re-read of last block succeeded. >> > 20-Nov 12:01 backup-sd JobId 4845: End of medium on Volume "WORMW-1242" >> > Bytes=764,853,046,272 Blocks=11,855,980 at 20-Nov-2018 12:01. >> > 20-Nov 12:01 backup1 JobId 4845: Created new Volume="WORMW-1243", >> > Pool="TapeArchive", MediaType="LTO-4" in catalog. >> > 20-Nov 12:01 backup-sd JobId 4845: Please mount append Volume >> > "WORMW-1243" or label a new one for: >> > Job: db1-job.2018-11-20_07.59.54_12 >> > Storage: "LTO-4" (/dev/nst0) >> > Pool: TapeArchive >> > Media type: LTO-4 >> > 20-Nov 12:15 backup-sd JobId 4845: Error: The Volume=WORMW-1243 on >> > device="LTO-4" (/dev/nst0) appears to be unlabeled. >> > 20-Nov 12:15 backup-sd JobId 4845: Labeled new Volume "WORMW-1243" on >> > tape device "LTO-4" (/dev/nst0). >> > 20-Nov 12:15 backup-sd JobId 4845: Wrote label to prelabeled Volume >> > "WORMW-1243" on tape device "LTO-4" (/dev/nst0) >> > 20-Nov 12:15 backup-sd JobId 4845: New volume "WORMW-1243" mounted on >> > device "LTO-4" (/dev/nst0) at 20-Nov-2018 12:15. >> > 20-Nov 12:25 backup-sd JobId 4845: Fatal error: append.c:223 Network >> > error reading from FD. ERR=Connection reset by peer >> > 20-Nov 12:25 backup-sd JobId 4845: Elapsed time=02:31:15, Transfer >> > rate=46.11 M Bytes/second >> > (From Pool's NextPool resource) >> > Catalog: "MyCatalog" (From Client resource) >> > Start time: 20-Nov-2018 09:39:31 >> > End time: 20-Nov-2018 12:25:04 >> > Elapsed time: 2 hours 45 mins 33 secs >> > Priority: 13 >> > SD Files Written: 4,792 >> > SD Bytes Written: 418,488,802,122 (418.4 GB) >> > Rate: 42131.2 KB/s >> > Volume name(s): WORMW-1242|WORMW-1243 >> > Volume Session Id: 9 >> > Volume Session Time: 1542631131 >> > Last Volume Bytes: 33,060,787,200 (33.06 GB) >> > SD Errors: 0 >> > SD termination status: OK >> > Termination: *** Copying Error *** >> > >> > Regarding copy jobs the FD and the SD are on the same machine. >> > >> > we are using: >> > >> > Distributor ID: Ubuntu >> > Description: Ubuntu 16.04.4 LTS >> > Release: 16.04 >> > Codename: xenial >> > >> > bacula 7.0.5 >> > >> > Tape drive: HP Ultrium 4-SCSI >> > >> > >> > Thanks for help, >> > >> > Andras >> > >> >> >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> > > > _______________________________________________ > Bacula-users mailing > listBacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users > > >
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
