Am 04.10.2017 um 15:44 schrieb Phil Stracchino:
On 10/04/17 04:13, Ralf Brinkmann wrote:
Thanks Phil,
I found two files in two different jobs that both span the same two
LTO-6 cassettes.
The two restore jobs for a single file each did require two cassettes
and did work without any error message.
A compare with md5sum found the restored files are o.k.
Interesting in several ways. How did you run a two-tape restore without
the restore timing out at tape change?
Just took a look into the logfiles of the restore test with our LTO6 HP
1/8 G2 autochanger - the point of the cassette change:
04-Okt 09:22 lx-vihost-1-sd JobId 2917: End of Volume "FR0401L6" at addr=0:0 on device
"tape1" (/dev/nst0).
04-Okt 09:22 lx-vihost-1-sd JobId 2917: 3307 Issuing autochanger "unload Volume
FR0401L6, Slot 5, Drive 0" command.
04-Okt 09:23 lx-vihost-1-sd JobId 2917: 3304 Issuing autochanger "load Volume
FR0402L6, Slot 6, Drive 0" command.
04-Okt 09:24 lx-vihost-1-sd JobId 2917: 3305 Autochanger "load Volume FR0402L6, Slot
6, Drive 0", status is OK.
04-Okt 09:24 lx-vihost-1-sd JobId 2917: Ready to read from volume "FR0402L6" on Tape
device "tape1" (/dev/nst0).
04-Okt 09:24 lx-vihost-1-sd JobId 2917: Forward spacing Volume "FR0402L6" to
addr=0:1
--
Ralf Brinkmann
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
