Hello everbody,
I tried the relabel as suggested, the media type has changed, but when
bacula tries to run a job, it doesn't find any appendable volumes.
I have 2 volumes on Scratch pool, both of them with the new media type
"LTO-5-LibHP09".
The following log was generated:
LibHP Job riviera-Daily-Weekly.2014-08-18_16.38.00_39 is waiting.
Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "LibHP09-drive_3" (/dev/tape/by-id/scsi-35001438016063963-nst)
Pool: riviera-Pool-Daily
Media type: LTO-5-LibHP09
castanheiras-bacula-dir No prior Full backup Job record found.
No prior or suitable Full backup found in catalog. Doing FULL backup.
castanheiras-bacula-dir BeforeJob: Ultima sexta-feira do mes=29
BeforeJob: Hoje=18
BeforeJob: Executa backup mensal somente se Hoje (18) = (29) Ultima
sexta-feira do mes.
shell command: run BeforeJob
"/usr/local/script/bacula/verificaSeEhUltimaSextaFeiraMes.sh W"
Using Device "LibHP09-drive_3"
Start Backup JobId 7604, Job=riviera-Daily-Weekly.2014-08-18_16.38.00_39
Any ideas?
On Mon, Aug 18, 2014 at 2:26 PM, Heitor Faria <hei...@bacula.com.br> wrote:
> Vinícius,
>
> One option I just tested is use the relabel command twice. One relabel to
> any arbitrary volume name (since you can't relabel to the same volume
> name), and a second relabel to the original volume name witch is acquired
> from the tape paper label.
> Don't know if there is better options.
>
> Cheers,
>
>
> On Mon, Aug 18, 2014 at 1:24 PM, Vinicius Alexandre Pereira de Souza <
> vinicius.apso...@gmail.com> wrote:
>
>> Hi Heitor,
>>
>> Thanks for help. I tried: update > volume parameters > all volumes from
>> all pools, but it didn't worked. I don't have an option like "update media
>> type" also.
>>
>>
>> On Mon, Aug 18, 2014 at 1:14 PM, Heitor Faria <hei...@bacula.com.br>
>> wrote:
>>
>>>
>>>
>>>
>>> The problem now is when my jobs run, it tries to use a media with "Media
>>>> Type = LTO-5-LibHP08", but all the medias are still configured as "LTO-5".
>>>> The following log was generated:
>>>>
>>>> When i list the media on bconsole, all of them still are LTO-5, after
>>>> searching for solutions, all i found was people suggesting to update the
>>>> values manually on database. is there a better way to correct the media
>>>> type on the medias?
>>>>
>>>
>>>
>>> Hi Vinicius: did you try the update > volume parameters > all volumes
>>> from all pools?
>>>
>>>
>>>>
>>>>
>>>> Thanks.
>>>>
>>>>
>>>> On Thu, Aug 7, 2014 at 2:39 PM, Roberts, Ben <
>>>> ben.robe...@gsacapital.com> wrote:
>>>>
>>>>> Hi Vinicius,
>>>>>
>>>>>
>>>>>
>>>>> You need to use a unique Media Type for each autochanger, e.g.
>>>>> “LTO5-Library1” and “LTO5-Library2”. These are arbitrary string values,
>>>>> the
>>>>> exact name doesn’t matter. Bacula believes a drive in library1 is suitable
>>>>> for loading a tape from library2 because the same Media Type is used for
>>>>> each.
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Ben Roberts
>>>>>
>>>>>
>>>>>
>>>>> *From:* Vinicius Alexandre Pereira de Souza [mailto:
>>>>> vinicius.apso...@gmail.com]
>>>>> *Sent:* 07 August 2014 17:39
>>>>> *To:* bacula-users@lists.sourceforge.net
>>>>> *Subject:* [Bacula-users] Bacula Loading Tape at the Wrong Library
>>>>>
>>>>>
>>>>>
>>>>> Hello everybody,
>>>>>
>>>>> I'm new to Bacula, and i'm having a problem using different storages
>>>>> in a same pool.
>>>>>
>>>>> I have two HP Tape Libraries installed on the Storage (LibHP08 and
>>>>> LibHP09), i tried to configure some jobs to access both libraries, but I'm
>>>>> having some trouble with bacula accessing the wrong library.
>>>>>
>>>>> For example, bacula tries to access volume "G00022L5" on slot 20 at
>>>>> LibHP08, but it reaches the volume "H00011L5" on slot 20 at LibHP09.
>>>>> Basically, it tries to get a tape on the correct slot, but in the wrong
>>>>> Library. It Generates the Following error:
>>>>>
>>>>>
>>>>>
>>>>> LibHP 3307 Issuing autochanger "unload slot 20, drive 1" command.
>>>>>
>>>>> Warning: Director wanted Volume "G00022L5".
>>>>>
>>>>> Current Volume "H00011L5" not acceptable because:
>>>>>
>>>>> 1998 Volume "H00011L5" catalog status is Append, not in Pool.
>>>>>
>>>>> Then, bacula unloads the drive, tries to find the correct tape, but
>>>>> loads the wrong one, generates the error again, and so on.
>>>>>
>>>>> The job never completes, since it doesn't find the correct tape.
>>>>>
>>>>> Some of my Pools:
>>>>>
>>>>>
>>>>>
>>>>> Pool {
>>>>>
>>>>> Name = machine-Pool-Weekly
>>>>>
>>>>> Pool Type = Backup
>>>>>
>>>>> Storage = LibHP08, LibHP09
>>>>>
>>>>> Recycle = yes
>>>>>
>>>>> AutoPrune = yes
>>>>>
>>>>> Volume Retention = 34 days
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Pool {
>>>>>
>>>>> Name = machine-Pool-Monthly
>>>>>
>>>>> Pool Type = Backup
>>>>>
>>>>> Storage = LibHP08, LibHP09
>>>>>
>>>>> Recycle = yes
>>>>>
>>>>> AutoPrune = yes
>>>>>
>>>>> Volume Retention = 1825 days
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Devices/Autochangers Config:
>>>>>
>>>>>
>>>>>
>>>>> #
>>>>>
>>>>> ## An autochanger device with four drives
>>>>>
>>>>> ## Library HP (LibHP08)
>>>>>
>>>>> ##
>>>>>
>>>>> Autochanger {
>>>>>
>>>>> Name = LibHP08_Changer
>>>>>
>>>>> Device = LibHP08-drive_1, LibHP08-drive_2, LibHP08-drive_3,
>>>>> LibHP08-drive_4
>>>>>
>>>>> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
>>>>>
>>>>> Changer Device = /dev/tape/by-id/scsi-35001438016063c04
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> #
>>>>>
>>>>> ## An autochanger device with four drives
>>>>>
>>>>> ## Library HP (LibHP09)
>>>>>
>>>>> ##
>>>>>
>>>>> Autochanger {
>>>>>
>>>>> Name = LibHP09_Changer
>>>>>
>>>>> Device = LibHP09-drive_1, LibHP09-drive_2, LibHP09-drive_3,
>>>>> LibHP09-drive_4
>>>>>
>>>>> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
>>>>>
>>>>> Changer Device = /dev/tape/by-id/scsi-3500143801606395c
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP08-drive_1 #
>>>>>
>>>>> Drive Index = 0
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c05-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP08-drive_2 #
>>>>>
>>>>> Drive Index = 1
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c08-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP08-drive_3 #
>>>>>
>>>>> Drive Index = 2
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c0b-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP08-drive_4 #
>>>>>
>>>>> Drive Index = 3
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c0e-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP09-drive_1 #
>>>>>
>>>>> Drive Index = 0
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-3500143801606395d-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP09-drive_2 #
>>>>>
>>>>> Drive Index = 1
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063960-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP09-drive_3 #
>>>>>
>>>>> Drive Index = 2
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063963-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Device {
>>>>>
>>>>> Name = LibHP09-drive_4 #
>>>>>
>>>>> Drive Index = 3
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Archive Device = /dev/tape/by-id/scsi-35001438016063966-nst
>>>>>
>>>>> AutomaticMount = yes; # when device opened, read it
>>>>>
>>>>> AlwaysOpen = yes;
>>>>>
>>>>> RemovableMedia = yes;
>>>>>
>>>>> RandomAccess = no;
>>>>>
>>>>> AutoChanger = yes
>>>>>
>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>>>
>>>>> Maximum Changer Wait = 600
>>>>>
>>>>> Maximum Concurrent Jobs = 1
>>>>>
>>>>> LabelMedia = yes
>>>>>
>>>>> }
>>>>>
>>>>> Storage config:
>>>>>
>>>>>
>>>>>
>>>>> Storage {
>>>>>
>>>>> Name = LibHP08
>>>>>
>>>>> Address = sd-host
>>>>>
>>>>> SDPort = 9103
>>>>>
>>>>> Password = "myPassword"
>>>>>
>>>>> Device = LibHP08_Changer
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Autochanger = yes
>>>>>
>>>>> Maximum Concurrent Jobs = 4
>>>>>
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> Storage {
>>>>>
>>>>> Name = LibHP09
>>>>>
>>>>> Address = sd-host
>>>>>
>>>>> SDPort = 9103
>>>>>
>>>>> Password = "myPassword"
>>>>>
>>>>> Device = LibHP09_Changer
>>>>>
>>>>> Media Type = LTO-5
>>>>>
>>>>> Autochanger = yes
>>>>>
>>>>> Maximum Concurrent Jobs = 4
>>>>>
>>>>> }
>>>>>
>>>>> At bconsole, i executed the following:
>>>>>
>>>>>
>>>>>
>>>>> update slots
>>>>>
>>>>> There was some tapes at the wrong place, it updated the catalog, but
>>>>> the error persists.
>>>>>
>>>>> I'm Currently using Bacula v5.2.12, I've installed the Director and
>>>>> the Storage on different machines, both of them communicating with no
>>>>> problems
>>>>>
>>>>> Any ideas?
>>>>>
>>>>>
>>>>>
>>>>> I also created a question at Serverfault:
>>>>>
>>>>> http://serverfault.com/questions/618720/
>>>>>
>>>>>
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> --
>>>>>
>>>>> Att,
>>>>>
>>>>> Vinicius Alexandre Pereira de Souza
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> This email and any files transmitted with it contain confidential and
>>>>> proprietary information and is solely for the use of the intended
>>>>> recipient. If you are not the intended recipient please return the email
>>>>> to
>>>>> the sender and delete it from your computer and you must not use,
>>>>> disclose,
>>>>> distribute, copy, print or rely on this email or its contents. This
>>>>> communication is for informational purposes only. It is not intended as an
>>>>> offer or solicitation for the purchase or sale of any financial instrument
>>>>> or as an official confirmation of any transaction. Any comments or
>>>>> statements made herein do not necessarily reflect those of GSA Capital.
>>>>> GSA
>>>>> Capital Partners LLP is authorised and regulated by the Financial Conduct
>>>>> Authority and is registered in England and Wales at Stratton House, 5
>>>>> Stratton Street, London W1J 8LA, number OC309261. GSA Capital Services
>>>>> Limited is registered in England and Wales at the same address, number
>>>>> 5320529.
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Att,
>>>> Vinicius Alexandre Pereira de Souza
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Bacula-users mailing list
>>>> Bacula-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>
>>>>
>>>
>>>
>>> --
>>> ============================================
>>> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon
>>> code at Udemy: bacula-users
>>> <https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
>>> +55 61 2021-8260
>>> +55 61 8268-4220
>>> Site: www.bacula.com.br
>>> Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
>>> Gtalk: heitorfa...@gmail.com
>>> ============================================
>>>
>>
>>
>>
>> --
>> Att,
>> Vinicius Alexandre Pereira de Souza
>>
>>
>
>
> --
> ============================================
> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon code
> at Udemy: bacula-users
> <https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
> +55 61 2021-8260
> +55 61 8268-4220
> Site: www.bacula.com.br
> Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
> Gtalk: heitorfa...@gmail.com
> ============================================
>
--
Att,
Vinicius Alexandre Pereira de Souza
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
