Hi Heitor,
Thanks for help. I tried: update > volume parameters > all volumes from all
pools, but it didn't worked. I don't have an option like "update media
type" also.
On Mon, Aug 18, 2014 at 1:14 PM, Heitor Faria <hei...@bacula.com.br> wrote:
>
>
>
> The problem now is when my jobs run, it tries to use a media with "Media
>> Type = LTO-5-LibHP08", but all the medias are still configured as "LTO-5".
>> The following log was generated:
>>
>> When i list the media on bconsole, all of them still are LTO-5, after
>> searching for solutions, all i found was people suggesting to update the
>> values manually on database. is there a better way to correct the media
>> type on the medias?
>>
>
>
> Hi Vinicius: did you try the update > volume parameters > all volumes from
> all pools?
>
>
>>
>>
>> Thanks.
>>
>>
>> On Thu, Aug 7, 2014 at 2:39 PM, Roberts, Ben <ben.robe...@gsacapital.com>
>> wrote:
>>
>>> Hi Vinicius,
>>>
>>>
>>>
>>> You need to use a unique Media Type for each autochanger, e.g.
>>> “LTO5-Library1” and “LTO5-Library2”. These are arbitrary string values, the
>>> exact name doesn’t matter. Bacula believes a drive in library1 is suitable
>>> for loading a tape from library2 because the same Media Type is used for
>>> each.
>>>
>>>
>>>
>>> Regards,
>>>
>>> Ben Roberts
>>>
>>>
>>>
>>> *From:* Vinicius Alexandre Pereira de Souza [mailto:
>>> vinicius.apso...@gmail.com]
>>> *Sent:* 07 August 2014 17:39
>>> *To:* bacula-users@lists.sourceforge.net
>>> *Subject:* [Bacula-users] Bacula Loading Tape at the Wrong Library
>>>
>>>
>>>
>>> Hello everybody,
>>>
>>> I'm new to Bacula, and i'm having a problem using different storages in
>>> a same pool.
>>>
>>> I have two HP Tape Libraries installed on the Storage (LibHP08 and
>>> LibHP09), i tried to configure some jobs to access both libraries, but I'm
>>> having some trouble with bacula accessing the wrong library.
>>>
>>> For example, bacula tries to access volume "G00022L5" on slot 20 at
>>> LibHP08, but it reaches the volume "H00011L5" on slot 20 at LibHP09.
>>> Basically, it tries to get a tape on the correct slot, but in the wrong
>>> Library. It Generates the Following error:
>>>
>>>
>>>
>>> LibHP 3307 Issuing autochanger "unload slot 20, drive 1" command.
>>>
>>> Warning: Director wanted Volume "G00022L5".
>>>
>>> Current Volume "H00011L5" not acceptable because:
>>>
>>> 1998 Volume "H00011L5" catalog status is Append, not in Pool.
>>>
>>> Then, bacula unloads the drive, tries to find the correct tape, but
>>> loads the wrong one, generates the error again, and so on.
>>>
>>> The job never completes, since it doesn't find the correct tape.
>>>
>>> Some of my Pools:
>>>
>>>
>>>
>>> Pool {
>>>
>>> Name = machine-Pool-Weekly
>>>
>>> Pool Type = Backup
>>>
>>> Storage = LibHP08, LibHP09
>>>
>>> Recycle = yes
>>>
>>> AutoPrune = yes
>>>
>>> Volume Retention = 34 days
>>>
>>> }
>>>
>>>
>>>
>>> Pool {
>>>
>>> Name = machine-Pool-Monthly
>>>
>>> Pool Type = Backup
>>>
>>> Storage = LibHP08, LibHP09
>>>
>>> Recycle = yes
>>>
>>> AutoPrune = yes
>>>
>>> Volume Retention = 1825 days
>>>
>>> }
>>>
>>>
>>>
>>> Devices/Autochangers Config:
>>>
>>>
>>>
>>> #
>>>
>>> ## An autochanger device with four drives
>>>
>>> ## Library HP (LibHP08)
>>>
>>> ##
>>>
>>> Autochanger {
>>>
>>> Name = LibHP08_Changer
>>>
>>> Device = LibHP08-drive_1, LibHP08-drive_2, LibHP08-drive_3,
>>> LibHP08-drive_4
>>>
>>> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
>>>
>>> Changer Device = /dev/tape/by-id/scsi-35001438016063c04
>>>
>>> }
>>>
>>>
>>>
>>> #
>>>
>>> ## An autochanger device with four drives
>>>
>>> ## Library HP (LibHP09)
>>>
>>> ##
>>>
>>> Autochanger {
>>>
>>> Name = LibHP09_Changer
>>>
>>> Device = LibHP09-drive_1, LibHP09-drive_2, LibHP09-drive_3,
>>> LibHP09-drive_4
>>>
>>> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
>>>
>>> Changer Device = /dev/tape/by-id/scsi-3500143801606395c
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP08-drive_1 #
>>>
>>> Drive Index = 0
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c05-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP08-drive_2 #
>>>
>>> Drive Index = 1
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c08-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP08-drive_3 #
>>>
>>> Drive Index = 2
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c0b-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP08-drive_4 #
>>>
>>> Drive Index = 3
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063c0e-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP09-drive_1 #
>>>
>>> Drive Index = 0
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-3500143801606395d-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP09-drive_2 #
>>>
>>> Drive Index = 1
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063960-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP09-drive_3 #
>>>
>>> Drive Index = 2
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063963-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>>
>>>
>>> Device {
>>>
>>> Name = LibHP09-drive_4 #
>>>
>>> Drive Index = 3
>>>
>>> Media Type = LTO-5
>>>
>>> Archive Device = /dev/tape/by-id/scsi-35001438016063966-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> AutoChanger = yes
>>>
>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>
>>> Maximum Changer Wait = 600
>>>
>>> Maximum Concurrent Jobs = 1
>>>
>>> LabelMedia = yes
>>>
>>> }
>>>
>>> Storage config:
>>>
>>>
>>>
>>> Storage {
>>>
>>> Name = LibHP08
>>>
>>> Address = sd-host
>>>
>>> SDPort = 9103
>>>
>>> Password = "myPassword"
>>>
>>> Device = LibHP08_Changer
>>>
>>> Media Type = LTO-5
>>>
>>> Autochanger = yes
>>>
>>> Maximum Concurrent Jobs = 4
>>>
>>> }
>>>
>>>
>>>
>>> Storage {
>>>
>>> Name = LibHP09
>>>
>>> Address = sd-host
>>>
>>> SDPort = 9103
>>>
>>> Password = "myPassword"
>>>
>>> Device = LibHP09_Changer
>>>
>>> Media Type = LTO-5
>>>
>>> Autochanger = yes
>>>
>>> Maximum Concurrent Jobs = 4
>>>
>>> }
>>>
>>> At bconsole, i executed the following:
>>>
>>>
>>>
>>> update slots
>>>
>>> There was some tapes at the wrong place, it updated the catalog, but
>>> the error persists.
>>>
>>> I'm Currently using Bacula v5.2.12, I've installed the Director and the
>>> Storage on different machines, both of them communicating with no problems
>>>
>>> Any ideas?
>>>
>>>
>>>
>>> I also created a question at Serverfault:
>>>
>>> http://serverfault.com/questions/618720/
>>>
>>>
>>>
>>> Thanks in advance!
>>>
>>> --
>>>
>>> Att,
>>>
>>> Vinicius Alexandre Pereira de Souza
>>>
>>>
>>>
>>> ------------------------------
>>> This email and any files transmitted with it contain confidential and
>>> proprietary information and is solely for the use of the intended
>>> recipient. If you are not the intended recipient please return the email to
>>> the sender and delete it from your computer and you must not use, disclose,
>>> distribute, copy, print or rely on this email or its contents. This
>>> communication is for informational purposes only. It is not intended as an
>>> offer or solicitation for the purchase or sale of any financial instrument
>>> or as an official confirmation of any transaction. Any comments or
>>> statements made herein do not necessarily reflect those of GSA Capital. GSA
>>> Capital Partners LLP is authorised and regulated by the Financial Conduct
>>> Authority and is registered in England and Wales at Stratton House, 5
>>> Stratton Street, London W1J 8LA, number OC309261. GSA Capital Services
>>> Limited is registered in England and Wales at the same address, number
>>> 5320529.
>>>
>>>
>>
>>
>> --
>> Att,
>> Vinicius Alexandre Pereira de Souza
>>
>>
>>
>> ------------------------------------------------------------------------------
>>
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
>
>
> --
> ============================================
> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon code
> at Udemy: bacula-users
> <https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
> +55 61 2021-8260
> +55 61 8268-4220
> Site: www.bacula.com.br
> Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
> Gtalk: heitorfa...@gmail.com
> ============================================
>
--
Att,
Vinicius Alexandre Pereira de Souza
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
