Hello,
2013/12/4 Ana Emília M. Arruda <emiliaarr...@gmail.com>
> Hi Richard,
>
> There are some mistakes about the storage definition in your confs.
> Considering you have an autochanger, I will put here a suggestion:
>
> bacula-dir.conf:
>
> Storage {
> Name = micd3.gbr.hp.com-sd
> Address = micd3.gbr.hp.com # here is your host name
> where is your bacula-sd running.
> SDPort = 9103
> Password = "LZmffqI8xfbnpj5T88tB+r+tPTQI/9Z2FFPrLqrNxOl0"
> Device = LTO-6-1 # the same name you have in bacula-sd.conf
> for Device Name (not Autochanger Name)
> Media Type = LTO-6
>
For my best knowledge it could be wrong.
> Autochanger = yes
>
If you add Autochanger = yes then at your Device above you should put
autochanger name (LTO-6-Autochanger in your example).
> }
>
>
> bacula-sd.conf:
>
> Autochanger {
> Name = LTO-6-Autochanger
>
It should be valid bacula-dir.conf->storage->device name.
> Device = LTO-6-1
> Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg0 # supposing it is /dev/sg0
> from your config: Changer Device = /dev/sg0
> }
>
> Device {
> Name = LTO-6-1
> Media Type = LTO-6
> Archive Device = /dev/nst0
> AutomaticMount = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Maximum File Size = 5GB
> AutoChanger = yes
> }
>
>
Regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
