Are you able to resolve micd3.gbr.hp.com-sd to IP. For example wit nslookup? Replace the name with IP address, restart director and storage daemon.
Is the storage daemon running? Is there any interesting logs in log file? On 12/04/2013 05:22 PM, Prout, Richard Alun wrote: > Hi, > > > > I am extremely new to Bacula and have run into a problem that I don’t > seem to be able fix. > > > > I have attached my */bacula-dir.conf/*, */bacula–fd.conf/* and my > */bacula-sd.conf/* files in the hope that someone out there can take a > quick look and ensure that they all look OK. Also attached are my > */config.out/* and my */config.log/* from the install process. > > > > The error message I am seeing is when I run the */status storage/* > command from the */bconsole/* prompt (the *). I am following the > ‘Running a Job’ tutorial from the following > http://www.bacula.org/5.2.x-manuals/en/main/main/Brief_Tutorial.html > > > > */show filesets/* returns the expected output > > */status dir/* returns expected output > > */status client/* returns expected output > > */status storage/* returns the following error > > > > */Automatically selected Storage: File/* > > */Connecting to Storage daemon File at micd3.gbr.hp.com-sd:9103/* > > */ /* > > */Failed to connect to Storage daemon File./* > > > > I tried to configure my bacula-dir.conf in the Storage entry with the > following: > > > > > > */# Definition of file storage device/* > > */Storage {/* > > */ Name = LTO-6/* > > */# Do not use "localhost" here/* > > */ Address = micd3.gbr.hp.com-sd # N.B. Use a fully > qualified name/* > > */here/* > > */ SDPort = 9103/* > > */ Password = "LZmffqI8xfbnpj5T88tB+r+tPTQI/9Z2FFPrLqrNxOl0"/* > > */ Device = FileStorage/* > > */ Media Type = LTO-6/* > > > > To correspond with the device entry in my baculu-sd.conf: > > > > */Device {/* > > */ Name = LTO-6/* > > */ Media Type = LTO-6/* > > */ Archive Device = /dev/nst0/* > > */ AutomaticMount = yes;/* > > */ AlwaysOpen = yes;/* > > */ RemovableMedia = yes;/* > > */ RandomAccess = no;/* > > */ Maximum File Size = 5GB/* > > */ Changer Command = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"/* > > */ Changer Device = /dev/sg0/* > > */ AutoChanger = yes/* > > */}/* > > > > But if I don’t use */File/* in the bacula-dir.conf file next to */Name/* > and */Media Type/* the Director daemons will not start. > > > > It looks as though there may be two different issues here. It would be > good to resolve the */status storage/* issue and then move onto the > */Director/* daemon issue. > > > > I have followed the Installing Bacula guide from > http://www.bacula.org/5.2.x-manuals/en/main/main/Installing_Bacula.html > > > > Everything compiled and installed correctly as far as I could see. > */bconsole/* starts and */bacula start/* and */stop /*works OK with the > daemons (apart from when I change the name and the media type to > correspond to my bacula-sd.conf file. So I am relatively confident that > bacula is installed correctly (although I would be more than happy if > someone could prove me wrong and thus fix my issue). > > > > I am running RedHat 5 UP6 X86_64 and bacula-5.2.13, I have an LTO-6 and > an MSL6480 library zoned into the server. If I run the more > /proc/scsi/scsi the operating system returns expected tape drive and > robotics output. > > > > Hope someone out there in Bacula land has the time to help me out here > as it would be much appreciated. > > > > > > Thanks, > > > > Rich > > HP_Blue_RGB_150_70px > > Richard Prout > > Hewlett Packard Ltd > > Building 3 > > Long Down Avenue > > Stoke Gifford > > Bristol BS34 8QZ > > United Kingdom > > > > 0117 3162580 > > richard.pr...@hp.com <mailto:richard.pr...@hp.com> > > > > __________________________________________________________________ > > Hewlett-Packard Limited Registered Office: Cain Road, Bracknell, Berks > RG12 1HN > > Registered No: 690597 England > > > > The contents of this message and any attachments to it are confidential > and may be legally privileged. If you have received this message in > error, you should delete it from your system immediately and advise the > sender. > > > > To any recipient of this message within HP, unless otherwise stated you > should consider this message and attachments as "HP CONFIDENTIAL". > > > > > > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
