I don't believe it has two drives in it. i've removed the second entry from
bacula-sd as I was running into a problem when I tried to run a job.
I've restarted all the services since removing the pv122T-2 lines from the
-sd.conf file and when I do a 'run' from bconsole followed by a 'status' on
"storage" I get the following error:
Device status:
Autochanger "PV-122T" with devices:
"PV-122T-1" (/dev/nst0)
Device "PV-122T-1" (/dev/nst0) is mounted with:
Volume: test001
Pool: File
Media type: LTO-2
Device is BLOCKED waiting to create a volume for:
Pool: File
Media type: LTO-2
Drive 0 status unknown.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
====
Used Volume status:
test001 on device "PV-122T-1" (/dev/nst0)
Reader=0 writers=0 devres=1 volinuse=0
====
The first time it said it needed a volume to be creaded so I used the volume
command and created test001. Now it seems the device is BLOCKED and needs a
volume?
-Rob
On Thu, May 5, 2011 at 2:40 PM, John Drescher <dresche...@gmail.com> wrote:
> 2011/5/5 Robert Longfield <robert.longfi...@klinsight.com>:
> > John,
> >
> > the online guidE I followed should setting up the pv-122t with -1 and -2
> so
> > I can't really give you a reason as to why I have them in my config,
> other
> > than i was told that was the correct way.
> >
>
> Does your pv-122T have 1 or 2 drives? I am not familiar with that
> particular archive.
>
> John
>
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
