On Fri, Aug 6, 2010 at 11:16 AM, sid009 <bacula-fo...@backupcentral.com> wrote: > >> That is bad. Each line should have a Volume tag. Do you only have >> labels on 1 tape? > > > Thanks for pointing this out I would have never noticed. Only one volume was > being shown because I had put a barcode on one tape to test the re-labelling. > I have now put barcodes on all tapes, see below: > > > r...@xxx# mtx status > Storage Changer /dev/changer:1 Drives, 7 Slots ( 0 Import/Export ) > Data Transfer Element 0:Empty > Storage Element 1:Full :VolumeTag=LT1005L1 > Storage Element 2:Full :VolumeTag=LT1006L1 > Storage Element 3:Full :VolumeTag=LT1007L1 > Storage Element 4:Full :VolumeTag=LT1000L1 > Storage Element 5:Full :VolumeTag=LT1001L1 > Storage Element 6:Full :VolumeTag=LT1002L1 > Storage Element 7:Full :VolumeTag=LT1003L1 > > The next steps would be to delete the labels and recreate them? > Most likely yes. Do you have any valuable backups on the tapes?
John ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
