On Thu, August 13, 2009 1:19 pm, Dan Langille wrote:
> I am setting up a new autochanger / tape drive. I'm trying to run btape.
> The basic test works, but I see this message when I start btape:
>
> Autochanger "loaded? drive 0", result: nothing loaded.
>
> mtx-changer [and mtx] both disagree with this:
>
> $ sudo /etc/bacula/mtx-changer /dev/sg4 loaded 0 /dev/nst0 0
> AAM240L4
Could this be a permission issue? I'm running as root (via sudo). The
output I'm encountering is:
$ sudo /sbin/btape -c /etc/bacula/bacula-sd.conf /dev/nst0
Password:
Sorry, try again.
Password:
Tape block granularity is 1024 bytes.
btape: butil.c:285 Using device: "/dev/nst0" for writing.
13-Aug 13:32 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
13-Aug 13:32 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
13-Aug 13:32 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
13-Aug 13:32 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
btape: btape.c:383 open device "LTO-4" (/dev/nst0): OK
*
Which isn't quite what I saw in 2006.
>
>
> I'm guessing that I'm overlooking something simple. More eyes please?
>
>
> The SD autochanger and device configuration:
>
>
> Autochanger {
> Name = "LTO-4-changer"
> Device = LTO-4
> Changer Command = "/etc/bacula/mtx-changer %c %o %s %a %d"
> Changer Device = /dev/sg4
> }
>
> #
> # A Linux or Solaris LTO-4 tape drive
> #
> Device {
> Name = LTO-4
> Media Type = LTO-4
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
>
> # # Enable the Alert command only if you have the mtx package loaded
> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> ## If you have smartctl, enable this, it has more info than tapeinfo
> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
>
>
>
> Debug output follows:
>
> $ sudo /sbin/btape -d100 -c /etc/bacula/bacula-sd.conf /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: stored_conf.c:701-0 Inserting director res:
> backup01.scs.myyearbook.com-mon
> btape: stored_conf.c:701-0 Inserting device res: LTO-4
> btape: butil.c:285 Using device: "/dev/nst0" for writing.
> btape: dev.c:269-0 init_dev: tape=1 dev_name=/dev/nst0
> btape: dev.c:345-0 open dev: type=2 dev_name="LTO-4" (/dev/nst0) vol=
> mode=OPEN_READ_ONLY
> btape: dev.c:394-0 Open dev: device is tape
> 13-Aug 13:04 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> btape: autochanger.c:273-0 Run program=/etc/bacula/mtx-changer /dev/sg4
> loaded 0 /dev/nst0 0
> btape: autochanger.c:275-0 run_prog: /etc/bacula/mtx-changer /dev/sg4
> loaded 0 /dev/nst0 0 stat=0 result=AAM240L4
> 13-Aug 13:04 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> btape: dev.c:409-0 Try open "LTO-4" (/dev/nst0) mode=OPEN_READ_ONLY
> btape: dev.c:431-0 Rewind after open
> btape: dev.c:2483-0 In set_os_device_parameters
> btape: dev.c:2489-0 Set block size to zero
> btape: dev.c:2505-0 MTSETDRVBUFFER
> btape: dev.c:483-0 open dev: tape 3 opened
> btape: dev.c:358-0 preserve=0x0 fd=3
> btape: dev.c:336-0 Close fd for mode change.
> btape: dev.c:345-0 open dev: type=2 dev_name="LTO-4" (/dev/nst0) vol=
> mode=OPEN_READ_WRITE
> btape: dev.c:394-0 Open dev: device is tape
> 13-Aug 13:04 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> btape: autochanger.c:273-0 Run program=/etc/bacula/mtx-changer /dev/sg4
> loaded 0 /dev/nst0 0
> btape: autochanger.c:275-0 run_prog: /etc/bacula/mtx-changer /dev/sg4
> loaded 0 /dev/nst0 0 stat=0 result=AAM240L4
> 13-Aug 13:04 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> btape: dev.c:409-0 Try open "LTO-4" (/dev/nst0) mode=OPEN_READ_WRITE
> btape: dev.c:431-0 Rewind after open
> btape: dev.c:2483-0 In set_os_device_parameters
> btape: dev.c:2489-0 Set block size to zero
> btape: dev.c:2505-0 MTSETDRVBUFFER
> btape: dev.c:483-0 open dev: tape 3 opened
> btape: dev.c:358-0 preserve=0x0 fd=3
> btape: btape.c:383 open device "LTO-4" (/dev/nst0): OK
> *
>
>
> --
> Dan Langille -- http://langille.org/
>
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> 30-Day
> trial. Simplify your report design, integration and deployment - and focus
> on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
Dan Langille -- http://langille.org/
--
Dan Langille -- http://langille.org/
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
