I am setting up a new autochanger / tape drive. I'm trying to run btape.
The basic test works, but I see this message when I start btape:
Autochanger "loaded? drive 0", result: nothing loaded.
mtx-changer [and mtx] both disagree with this:
$ sudo /etc/bacula/mtx-changer /dev/sg4 loaded 0 /dev/nst0 0
AAM240L4
I'm guessing that I'm overlooking something simple. More eyes please?
The SD autochanger and device configuration:
Autochanger {
Name = "LTO-4-changer"
Device = LTO-4
Changer Command = "/etc/bacula/mtx-changer %c %o %s %a %d"
Changer Device = /dev/sg4
}
#
# A Linux or Solaris LTO-4 tape drive
#
Device {
Name = LTO-4
Media Type = LTO-4
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo
## Alert Command = "sh -c 'smartctl -H -l error %c'"
}
Debug output follows:
$ sudo /sbin/btape -d100 -c /etc/bacula/bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: stored_conf.c:701-0 Inserting director res:
backup01.scs.myyearbook.com-mon
btape: stored_conf.c:701-0 Inserting device res: LTO-4
btape: butil.c:285 Using device: "/dev/nst0" for writing.
btape: dev.c:269-0 init_dev: tape=1 dev_name=/dev/nst0
btape: dev.c:345-0 open dev: type=2 dev_name="LTO-4" (/dev/nst0) vol=
mode=OPEN_READ_ONLY
btape: dev.c:394-0 Open dev: device is tape
13-Aug 13:04 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
btape: autochanger.c:273-0 Run program=/etc/bacula/mtx-changer /dev/sg4
loaded 0 /dev/nst0 0
btape: autochanger.c:275-0 run_prog: /etc/bacula/mtx-changer /dev/sg4
loaded 0 /dev/nst0 0 stat=0 result=AAM240L4
13-Aug 13:04 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
btape: dev.c:409-0 Try open "LTO-4" (/dev/nst0) mode=OPEN_READ_ONLY
btape: dev.c:431-0 Rewind after open
btape: dev.c:2483-0 In set_os_device_parameters
btape: dev.c:2489-0 Set block size to zero
btape: dev.c:2505-0 MTSETDRVBUFFER
btape: dev.c:483-0 open dev: tape 3 opened
btape: dev.c:358-0 preserve=0x0 fd=3
btape: dev.c:336-0 Close fd for mode change.
btape: dev.c:345-0 open dev: type=2 dev_name="LTO-4" (/dev/nst0) vol=
mode=OPEN_READ_WRITE
btape: dev.c:394-0 Open dev: device is tape
13-Aug 13:04 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
btape: autochanger.c:273-0 Run program=/etc/bacula/mtx-changer /dev/sg4
loaded 0 /dev/nst0 0
btape: autochanger.c:275-0 run_prog: /etc/bacula/mtx-changer /dev/sg4
loaded 0 /dev/nst0 0 stat=0 result=AAM240L4
13-Aug 13:04 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
btape: dev.c:409-0 Try open "LTO-4" (/dev/nst0) mode=OPEN_READ_WRITE
btape: dev.c:431-0 Rewind after open
btape: dev.c:2483-0 In set_os_device_parameters
btape: dev.c:2489-0 Set block size to zero
btape: dev.c:2505-0 MTSETDRVBUFFER
btape: dev.c:483-0 open dev: tape 3 opened
btape: dev.c:358-0 preserve=0x0 fd=3
btape: btape.c:383 open device "LTO-4" (/dev/nst0): OK
*
--
Dan Langille -- http://langille.org/
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
