On Thu, Aug 13, 2009 at 3:09 PM, John Drescher<dresche...@gmail.com> wrote:
> On Thu, Aug 13, 2009 at 2:45 PM, Dan Langille<d...@langille.org> wrote:
>> On Thu, August 13, 2009 2:27 pm, Dan Langille wrote:
>>>
>>> On Thu, August 13, 2009 1:19 pm, Dan Langille wrote:
>>>> I am setting up a new autochanger / tape drive. I'm trying to run
>>>> btape.
>>>> The basic test works, but I see this message when I start btape:
>>>>
>>>> Autochanger "loaded? drive 0", result: nothing loaded.
>>>>
>>>> mtx-changer [and mtx] both disagree with this:
>>>>
>>>> $ sudo /etc/bacula/mtx-changer /dev/sg4 loaded 0 /dev/nst0 0
>>>> AAM240L4
>>>
>>> That is a problem. You don't want the label. You want the slt it came
>>> from. See
>>> http://www.bacula.org/en/dev-manual/Autochanger_Resource.html#SECTION0017130000000000000000
>>>
>>> loaded -- returns number of the slot that is loaded, base 1,
>>> in the drive or 0 if the drive is empty.
>>>
>>> Current problem: I can't see how to get this information from the device.
>>> I'll keep working on it:
>>>
>>> $ sudo /usr/sbin/mtx -f /dev/sg4 inquiry
>>> Password:
>>> Product Type: Medium Changer
>>> Vendor ID: 'QUANTUM '
>>> Product ID: 'PX500 '
>>> Revision: '0033'
>>> Attached Changer: No
>>> [dlangi...@backup01 bacula]$
>>
>> I think we have a problem:
>>
>> [dlangi...@backup01 bacula]$ sudo /usr/sbin/mtx -f /dev/sg4 load 3
>> [dlangi...@backup01 bacula]$ sudo /usr/sbin/mtx -f /dev/sg4 status
>> Storage Changer /dev/sg4:1 Drives, 38 Slots ( 36 Import/Export )
>> Data Transfer Element 0:Full (Unknown Storage Element Loaded):VolumeTag =
>> AAM240L4
>> Storage Element 1:Empty
>> Storage Element 2:Empty
>> Storage Element 3 IMPORT/EXPORT:Empty
>> Storage Element 4 IMPORT/EXPORT:Full :VolumeTag=AAM241L4
>>
>> Should that 'Unknown Storage Element Loaded' be a 3 to indicate the slot
>> it came from?
>>
>
> Here is what my mtx output looks like
>
> dev6 ~ # mtx -f /dev/autochanger1 status
> Storage Changer /dev/autochanger1:2 Drives, 24 Slots ( 1 Import/Export )
> Data Transfer Element 0:Full (Storage Element 17 Loaded):VolumeTag = A00036
> Data Transfer Element 1:Empty
> Storage Element 1:Full :VolumeTag=A00030
> Storage Element 2:Empty:VolumeTag=
> Storage Element 3:Full :VolumeTag=A00058
> Storage Element 4:Full :VolumeTag=A00053
> Storage Element 5:Full :VolumeTag=A00023
> Storage Element 6:Full :VolumeTag=A00006
> Storage Element 7:Full :VolumeTag=A00007
> Storage Element 8:Full :VolumeTag=A00052
> Storage Element 9:Full :VolumeTag=A00028
> Storage Element 10:Full :VolumeTag=A00020
> Storage Element 11:Full :VolumeTag=A00054
> Storage Element 12:Full :VolumeTag=A00039
> Storage Element 13:Full :VolumeTag=A00048
> Storage Element 14:Full :VolumeTag=A00012
> Storage Element 15:Full :VolumeTag=A00068
> Storage Element 16:Full :VolumeTag=A00069
> Storage Element 17:Empty:VolumeTag=
> Storage Element 18:Full :VolumeTag=A00065
> Storage Element 19:Full :VolumeTag=A00066
> Storage Element 20:Full :VolumeTag=A00067
> Storage Element 21:Full :VolumeTag=A00062
> Storage Element 22:Full :VolumeTag=A00063
> Storage Element 23:Full :VolumeTag=A00064
> Storage Element 24 IMPORT/EXPORT:Full :VolumeTag=A00029
>
> What version of mtx are you using?
>
> dev6 ~ # equery l mtx
> [ Searching for package 'mtx' in all categories among: ]
> * installed packages
> [I--] [ ] sys-block/mtx-1.2.18 (0)
>
> It looks like I have 1.2.18
>
> John
>
Ahh. If I manually load a tape using controls on the archive I get the
same. Bacula will pick this up correctly if I update slots in the
console however.
dev6 ~ # mtx -f /dev/autochanger1 status
Storage Changer /dev/autochanger1:2 Drives, 24 Slots ( 1 Import/Export )
Data Transfer Element 0:Full (Storage Element 17 Loaded):VolumeTag = A00036
Data Transfer Element 1:Full (Unknown Storage Element Loaded):VolumeTag = A00029
Storage Element 1:Full :VolumeTag=A00030
Storage Element 2:Empty:VolumeTag=
Storage Element 3:Full :VolumeTag=A00058
Storage Element 4:Full :VolumeTag=A00053
Storage Element 5:Full :VolumeTag=A00023
Storage Element 6:Full :VolumeTag=A00006
Storage Element 7:Full :VolumeTag=A00007
Storage Element 8:Full :VolumeTag=A00052
Storage Element 9:Full :VolumeTag=A00028
Storage Element 10:Full :VolumeTag=A00020
Storage Element 11:Full :VolumeTag=A00054
Storage Element 12:Full :VolumeTag=A00039
Storage Element 13:Full :VolumeTag=A00048
Storage Element 14:Full :VolumeTag=A00012
Storage Element 15:Full :VolumeTag=A00068
Storage Element 16:Full :VolumeTag=A00069
Storage Element 17:Empty:VolumeTag=
Storage Element 18:Full :VolumeTag=A00065
Storage Element 19:Full :VolumeTag=A00066
Storage Element 20:Full :VolumeTag=A00067
Storage Element 21:Full :VolumeTag=A00062
Storage Element 22:Full :VolumeTag=A00063
Storage Element 23:Full :VolumeTag=A00064
Storage Element 24 IMPORT/EXPORT:Empty:VolumeTag=
--
John M. Drescher
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
