>This > causes great problems with Bacula. What will happen is Bacula needs a > tape in Drive0, but unload the tape in Drive1 into the slot for Drive0 > and load the correct tape into Drive1, then find that the wrong tape is > in Drive0 and wait for a mount of the correct tape. I have to stop the > SD, swap the /dev/st[01] entries, restart the SD, perform an 'update > slots', after a few jobs crash, then they start working again. After the > jobs run, I have to manually move tapes around to get them back into the > correct slots and do another 'update slots'. >
I see. I think the problem is mtx will load the tape into the first real drive in the changer and with the /dev/nst0 and /dev/nst1 switched bacula will look for the tape in the wrong drive when /dev/nst1 is the first drive in the changer. John ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
