Hello all.
I'm new to the list and having some issues with getting this backup tape
system running. I decided to use bacula because it has a GUI form on webmin
making it easier to remotely manage.
When at console I'm running a test to see if I can't get this thing to run.
/sbin/btape -c /etc/bacula/bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:285 Using device: "/dev/nst0" for writing.
27-Jan 15:48 btape: Fatal Error at device.c:296 because:
dev open failed: dev.c:433 Unable to open device "DDS-4" (/dev/nst0):
ERR=Device or resource busy
27-Jan 15:48 btape JobId 0: Fatal error: butil.c:194 Cannot open "DDS-4"
(/dev/nst0)
I'm assuming it is probably a driver problem but I'm not sure. When I did
the straight write test and mounting of the tape drive.. I didn't get any
errors. Anyone point me in the right direction to get this resolved?
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
