---------- Forwarded message ---------- From: John Drescher <[EMAIL PROTECTED]> Date: Jan 28, 2008 9:35 AM Subject: Re: [Bacula-users] Problem with either drivers To: [EMAIL PROTECTED]
> Redhat FC8 the tape drive is a Dell LTO2 drive. After I installed the > SCSI drivers for the Adaptec controller I had installed they used nst0 > and st0 depending on which you look at. I believe the certance tape > is probably the st0 so maybe that is my issue. I'll have to have > another look see. > No. st0 is the same as nst0 the only difference is that st0 is supposed to rewind the tape between operations. In bacula you do not want that so nst0 is the correct choice. John -- John M. Drescher ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
