Boy, I do need new glasses, Changer Command = "/opt/bacula/bin/mtx-changer
%c %o %S %a %d".
It should have been Changer Command = "/opt/bacula/scripts/mtx-changer %c
%o %S %a %d"
Now I am getting the following error:
bin/btape /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:286 Using device: "/dev/nst0" for writing.
10-May 14:26 btape: 3301 Issuing autochanger "loaded? drive 0" command.
10-May 14:26 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
10-May 14:31 btape: Fatal Error at device.c:280 because:
dev open failed: dev.c:425 Unable to open device "Drive-1" (/dev/nst0):
ERR=Input/output error
10-May 14:31 btape: btape Fatal error: butil.c:195 Cannot open "Drive-1"
(/dev/nst0)
Here is the Drive-1 configuration.
SD.conf file (New)
Autochanger {
Name = Autochanger
Device = Drive-1
Changer Command = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg0
}
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO-1
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
Any Ideas.
Mike
Arno Lehmann wrote:
>
> Hi,
>
> On 5/10/2007 8:17 PM, Mike Vasquez wrote:
>> I just upgraded to 2.0.3. I am having problems mounting the Autochanger.
>> Here are my test results.
>>
>> tapeinfo -f /dev/sg0
>> Product Type: Medium Changer
>> Vendor ID: 'DELL '
>> Product ID: 'PV-122T '
>> Revision: 'D37r'
>> Attached Changer: No
>> SerialNumber: '3123B92743'
>> Invalid tapealert page: 0
>>
>> mtx -f /dev/sg0 inquiry
>> Product Type: Medium Changer
>> Vendor ID: 'DELL '
>> Product ID: 'PV-122T '
>> Revision: 'D37r'
>> Attached Changer: No
>>
>> /btape /dev/nst0
>> Tape block granularity is 1024 bytes.
>> btape: butil.c:286 Using device: "/dev/nst0" for writing.
>> 10-May 10:20 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 10-May 10:20 btape: 3991 Bad autochanger "loaded? drive 0" command:
>> ERR=No
>> such file or directory.
>> Results=
>> ## It just hangs here.
>
> Probably it doesn't find the mtx-changer script (or whatever it tries to
> use in your case - I always use btabe with the SD configuration).
>
>> When I try to mount to take using the console here is what I get.
>>
>> SD.conf file
>> Autochanger {
>> Name = Autochanger
>> Device = Drive-1
>> Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
>
> Are you sure the Bacula user can run this script, and it works as
> expected?
>
>> ChangerDevice = /dev/sg0
>> }
>>
>> Device {
>> Name = Drive-1 #
>> Drive Index = 0
>> Media Type = LTO-1
>> Archive Device = /dev/nst0
>> AutomaticMount = yes;
>> AlwaysOpen = yes;
>> RemovableMedia = yes;
>> RandomAccess = no;
>> AutoChanger = yes
>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> }
> ...
>> *mount ToTape
>> Connecting to Storage daemon ToTape at nmc-sdca-mon1:9103 ...
>> Enter autochanger slot: 1
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>> directory.
>
> Looks like the SD, too, can't run mtx-changer.
>
>> Results=
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>> directory.
>> Results=
>> 3304 Issuing autochanger "load slot 1, drive 0" command.
>> 3992 Bad autochanger "load slot 1, drive 0": ERR=No such file or
>> directory.
>> Results=
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>> directory.
>> Results=
>> 3901 open device failed: ERR=dev.c:425 Unable to open device "ToTape.0"
>> (/dev/nst0): ERR=Input/output error
>>
>> What could be wrong. It was working before I upgraded.
>
> Permissions, probably. It's possible that, before the upgrade, the SD
> ran as root and it now runs as a different user.
>
> Arno
>
>> Mike
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
> --
> IT-Service Lehmann [EMAIL PROTECTED]
> Arno Lehmann http://www.its-lehmann.de
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
View this message in context:
http://www.nabble.com/Autochanger-problem-tf3723302.html#a10422074
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
