In my /etc/init.d/bacula-sd script the argument that I use to start the
bacula sd daemon is
ARGS="-c /opt/bacula/bacula-sd.conf -u root -g tape"
Mike
Arno Lehmann wrote:
>
> Hi,
>
> On 5/10/2007 11:41 PM, Mike Vasquez wrote:
>> Boy, I do need new glasses, Changer Command =
>> "/opt/bacula/bin/mtx-changer
>> %c %o %S %a %d".
>>
>> It should have been Changer Command = "/opt/bacula/scripts/mtx-changer
>> %c
>> %o %S %a %d"
>
> Yeah, that's what you get for customizing your installation ;-) I can
> assure you, though, that glasses don't necessarily help with this sort
> of problems :-)
>
>> Now I am getting the following error:
>>
>> bin/btape /dev/nst0
>> Tape block granularity is 1024 bytes.
>> btape: butil.c:286 Using device: "/dev/nst0" for writing.
>> 10-May 14:26 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 10-May 14:26 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
>> 10-May 14:31 btape: Fatal Error at device.c:280 because:
>> dev open failed: dev.c:425 Unable to open device "Drive-1" (/dev/nst0):
>> ERR=Input/output error
>>
>> 10-May 14:31 btape: btape Fatal error: butil.c:195 Cannot open "Drive-1"
>> (/dev/nst0)
>
> Have you tried to access the tape drive as the user the SD runs as?
>
> "permission denied" or "no such file" would be what I expected, but
> "cannot open" might also indicate a permissions problem or, perhaps, the
> tape is not fully loaded into the drive, or something.
>
> Trying 'mt -f /dev/nst0 status' as the Bacula user should work, and if
> it doesn't, it might tell us something...
>
> Arno
>
>
>> Here is the Drive-1 configuration.
>> SD.conf file (New)
>> Autochanger {
>> Name = Autochanger
>> Device = Drive-1
>> Changer Command = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
>> Changer Device = /dev/sg0
>> }
>>
>> Device {
>> Name = Drive-1
>> Drive Index = 0
>> Media Type = LTO-1
>> Archive Device = /dev/nst0
>> AutomaticMount = yes;
>> AlwaysOpen = yes;
>> RemovableMedia = yes;
>> RandomAccess = no;
>> AutoChanger = yes
>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> }
>>
>> Any Ideas.
>>
>> Mike
>>
>> Arno Lehmann wrote:
>>> Hi,
>>>
>>> On 5/10/2007 8:17 PM, Mike Vasquez wrote:
>>>> I just upgraded to 2.0.3. I am having problems mounting the
>>>> Autochanger.
>>>> Here are my test results.
>>>>
>>>> tapeinfo -f /dev/sg0
>>>> Product Type: Medium Changer
>>>> Vendor ID: 'DELL '
>>>> Product ID: 'PV-122T '
>>>> Revision: 'D37r'
>>>> Attached Changer: No
>>>> SerialNumber: '3123B92743'
>>>> Invalid tapealert page: 0
>>>>
>>>> mtx -f /dev/sg0 inquiry
>>>> Product Type: Medium Changer
>>>> Vendor ID: 'DELL '
>>>> Product ID: 'PV-122T '
>>>> Revision: 'D37r'
>>>> Attached Changer: No
>>>>
>>>> /btape /dev/nst0
>>>> Tape block granularity is 1024 bytes.
>>>> btape: butil.c:286 Using device: "/dev/nst0" for writing.
>>>> 10-May 10:20 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>>>> 10-May 10:20 btape: 3991 Bad autochanger "loaded? drive 0" command:
>>>> ERR=No
>>>> such file or directory.
>>>> Results=
>>>> ## It just hangs here.
>>> Probably it doesn't find the mtx-changer script (or whatever it tries to
>>> use in your case - I always use btabe with the SD configuration).
>>>
>>>> When I try to mount to take using the console here is what I get.
>>>>
>>>> SD.conf file
>>>> Autochanger {
>>>> Name = Autochanger
>>>> Device = Drive-1
>>>> Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
>>> Are you sure the Bacula user can run this script, and it works as
>>> expected?
>>>
>>>> ChangerDevice = /dev/sg0
>>>> }
>>>>
>>>> Device {
>>>> Name = Drive-1 #
>>>> Drive Index = 0
>>>> Media Type = LTO-1
>>>> Archive Device = /dev/nst0
>>>> AutomaticMount = yes;
>>>> AlwaysOpen = yes;
>>>> RemovableMedia = yes;
>>>> RandomAccess = no;
>>>> AutoChanger = yes
>>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>> }
>>> ...
>>>> *mount ToTape
>>>> Connecting to Storage daemon ToTape at nmc-sdca-mon1:9103 ...
>>>> Enter autochanger slot: 1
>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>> directory.
>>> Looks like the SD, too, can't run mtx-changer.
>>>
>>>> Results=
>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>> directory.
>>>> Results=
>>>> 3304 Issuing autochanger "load slot 1, drive 0" command.
>>>> 3992 Bad autochanger "load slot 1, drive 0": ERR=No such file or
>>>> directory.
>>>> Results=
>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>> directory.
>>>> Results=
>>>> 3901 open device failed: ERR=dev.c:425 Unable to open device "ToTape.0"
>>>> (/dev/nst0): ERR=Input/output error
>>>>
>>>> What could be wrong. It was working before I upgraded.
>>> Permissions, probably. It's possible that, before the upgrade, the SD
>>> ran as root and it now runs as a different user.
>>>
>>> Arno
>>>
>>>> Mike
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>> --
>>> IT-Service Lehmann [EMAIL PROTECTED]
>>> Arno Lehmann http://www.its-lehmann.de
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by DB2 Express
>>> Download DB2 Express C - the FREE version of DB2 express and take
>>> control of your XML. No limits. Just data. Click to get it now.
>>> http://sourceforge.net/powerbar/db2/
>>> _______________________________________________
>>> Bacula-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>
>
> --
> IT-Service Lehmann [EMAIL PROTECTED]
> Arno Lehmann http://www.its-lehmann.de
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
View this message in context:
http://www.nabble.com/Autochanger-problem-tf3723302.html#a10422402
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
