Hi,
On 6/21/2006 8:19 PM, Emery Guevremont wrote:
...
> Ya I updated my config for bacula-sd.conf, but it didn't change anything.
>
> BTW, I'm running dbcheck in fix mode, and it's fixing a lot of things,
> but I still don't see how that's gonna fix my problem.
>
> Here's the new bacula-sd.conf:
>
> Autochanger {
> Name = "AutoLoader"
> Device = Drive-1
> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg1
> }
>
> Device {
> Name = Drive-1
> Drive Index = 0
> Media Type = SDLT-320
> Archive Device = /dev/nst2 # Normal archive device
> Autochanger = yes
> Autoselect = yes
> LabelMedia = no;
> AutomaticMount = yes;
> AlwaysOpen = yes;
> Spool Directory = /vservers/tmp
> Maximum Spool Size = 10000000000
> # Mount Anonymous Volumes = no;
> }
I don't have any other ideas now but to try and run a very simple test
setup and create lots of debug output. Unfortunately, I never tried
automatic volume labeling with a tape drive, so I have no idea how that
should behave.
I'd suggest to start with two small sets of tapes and, with a clean
catalog and empty tapes start with 'update slots' and 'label barcodes'.
Perhaps this allows someone to see what's going wrong in your setup.
Arno
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
