On Fri, Feb 24, 2006 at 04:36:19PM -0500, Ian Levesque wrote: > This is what I do to handle the LTO-1 and LTO-2 drives in my changer. > I have the autochanger specified as one storage resource, with the > drives specified separately as well. I have a pool of LTO-1 tapes and > another of LTO-2. The LTO-1 tapes are used in jobs that reference the > autochanger. And then I defined larger jobs to use the LTO-2 drive > directly. Not elegant, but it works enough for me at the moment. > Though I haven't yet had the chance to test whether the LTO-2 jobs > will use the changer when a tape fills...
This sounds like a pretty usefull setup. If you have a few extra minutes, would you mind posting the relevant bits of your config into sample configs section of the wiki? http://paramount.ind.wpi.edu/wiki/doku.php?id=sample_configs -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
