Christian,
you sent this not to the list but to me only.
On 10.10.2005 09:36, Christian Theune wrote:
Hi,
On 10/8/05, *Arno Lehmann* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
I don't know if I understood you correctly, so...
Do you say that the autochanger works sometimes, or that the
autochanger
never works?
The hardware is fine. The autochanger itself works. The mtx script also
always works. (At least when beeing invoked by me manually.)
What I meant was: Do you always get the request to change tapes, or does
bacula change the tapes sometimes, and sometimes not?
It usually ends up that I have to:
Usually... so sometimes it does work automatically?
Arno
bconsole: unmount
mtx-changer ... unload ...
mtx-changer ... load ...
bconsole: mount
(which is supposed to happen automatically ...)
> It tends to send out an
> "operator intervention needed" mail and wants me to change the tape.
> Once that happened, it keeps asking me for changing the tapes.
Sometimes
> a restart helps.
>
> I wasn't able to find any information about this in the list
archives or
> on google, and the message log doesn't mention any problem, except
> asking every now and then for a new tape.
>
> Any ideas?
Configuration? Hardware issue? Debug output from SD and mtx-changer?
I don't think there is a hardware issue.
I'll attach some of my configuration here.
I'll try to find out how to enable debug output for SD and mtx-changer.
Best regards,
Christian
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
