Hello,
On 14.10.2005 11:22, Christian Theune wrote:
Hi,
On 10/11/05, *Arno Lehmann* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Christian,
you sent this not to the list but to me only.
Darn. I fowarded it now. Thanks for pointing this out.
On 10.10.2005 09:36, Christian Theune wrote:
> The hardware is fine. The autochanger itself works. The mtx
script also
> always works. (At least when beeing invoked by me manually.)
What I meant was: Do you always get the request to change tapes, or does
bacula change the tapes sometimes, and sometimes not?
> It usually ends up that I have to:
Usually... so sometimes it does work automatically?
It usually works for a couple of times, then it stops and only works
again after restarting the director.
That's not good.
Especially as it's the director you need to restart - the DIR doesn't
touch the changer itself.
You can run the daemons with debug outputcapturing by, for example,
adding output redirection to the startup script, and later submit a
command like "setdebug level=400 dir" or "...400 storage=<a storage name
at the SD you want to monitor>"
At debug level 400, IIRC, you see a detailed report of the tape changing
process in the SD log. At about the same time, you should find something
in the DIR's log that has to do with selecting the next volume, and then
mounting it.
Arno
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
