Thank you Jonathan, no driver in the kernel? This something means giving up to me. Very sad, it's my first time taste OpenBSD and really like it, my plan was to set up a music server MPD.
On Fri, Nov 11, 2022 at 9:32 AM Jonathan Gray <j...@jsg.id.au> wrote: > > On Thu, Nov 10, 2022 at 09:50:55PM +0800, Jazzi Hong wrote: > > Hi Fellows, > > > > Just installed OpenBSD 7.2 on Cubieboard2 which has a AllWinner A20 > > SOC, audo seems doesn't work. > > > > > $ mixerctl > > > mixerctl: /dev/audioctl0: Device not configured > > > > > > > $ sndioctl > > > default: can't open control device > > > > > > In Linux the driver is sun4i_codec, tried pkg_info -Q and also Google, > > both didn't find anything helpful. > > > > Is the driver missing now? This is my first time to install OpenBSD so > > kind of getting lost, any hints will be appreciated. > > There is no driver in the kernel for allwinner,sun7i-a20-codec > In your dmesg it shows as: > "codec" at simplebus0 not configured > > > > > > > === dmesg and hw.sensors === > > > > # dmesg > > OpenBSD 7.2 (GENERIC) #71: Thu Sep 29 11:47:02 MDT 2022 > > dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC > > real mem = 954286080 (910MB) > > avail mem = 926662656 (883MB) > > random: good seed from bootblocks > > mainbus0 at root: Cubietech Cubieboard2 > > cpu0 at mainbus0 mpidr 0: ARM Cortex-A7 r0p4 > > cpu0: 32KB 32b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu0: 256KB 64b/line 8-way L2 cache > > cortex0 at mainbus0 > > psci0 at mainbus0: PSCI 0.0 > > sxiccmu0 at mainbus0 > > agtimer0 at mainbus0: 24000 kHz > > simplebus0 at mainbus0: "soc" > > sxiccmu1 at simplebus0 > > sxipio0 at simplebus0: 175 pins > > sxirtc0 at simplebus0 > > sxisid0 at simplebus0 > > ampintc0 at simplebus0 nirq 160, ncpu 2: "interrupt-controller" > > "system-control" at simplebus0 not configured > > "interrupt-controller" at simplebus0 not configured > > "dma-controller" at simplebus0 not configured > > "lcd-controller" at simplebus0 not configured > > "lcd-controller" at simplebus0 not configured > > "video-codec" at simplebus0 not configured > > sximmc0 at simplebus0 > > sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma > > "usb" at simplebus0 not configured > > "phy" at simplebus0 not configured > > ehci0 at simplebus0 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > > 2.00/1.00 addr 1 > > ohci0 at simplebus0: version 1.0 > > "crypto-engine" at simplebus0 not configured > > "hdmi" at simplebus0 not configured > > sxiahci0 at simplebus0: AHCI 1.1 > > sxiahci0: port 0: 3.0Gb/s > > scsibus0 at sxiahci0: 32 targets > > sd0 at scsibus0 targ 0 lun 0: <ATA, ST1000LM024 HN-M, 2BA3> > > naa.50004cf20fb99f7f > > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors > > ehci1 at simplebus0 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > > 2.00/1.00 addr 1 > > ohci1 at simplebus0: version 1.0 > > "timer" at simplebus0 not configured > > sxidog0 at simplebus0 > > "ir" at simplebus0 not configured > > "codec" at simplebus0 not configured > > sxits0 at simplebus0 > > com0 at simplebus0: dw16550 > > com0: console > > sxitwi0 at simplebus0 > > iic0 at sxitwi0 > > axppmic0 at iic0 addr 0x34: AXP209 > > sxitwi1 at simplebus0 > > iic1 at sxitwi1 > > "gpu" at simplebus0 not configured > > dwge0 at simplebus0: rev 0x00, address 02:90:09:c2:25:2e > > rlphy0 at dwge0 phy 1: RTL8201L 10/100 PHY, rev. 1 > > "hstimer" at simplebus0 not configured > > "display-frontend" at simplebus0 not configured > > "display-frontend" at simplebus0 not configured > > "display-backend" at simplebus0 not configured > > "display-backend" at simplebus0 not configured > > gpio0 at sxipio0: 32 pins > > gpio1 at sxipio0: 32 pins > > gpio2 at sxipio0: 32 pins > > gpio3 at sxipio0: 32 pins > > gpio4 at sxipio0: 32 pins > > gpio5 at sxipio0: 32 pins > > gpio6 at sxipio0: 32 pins > > gpio7 at sxipio0: 32 pins > > gpio8 at sxipio0: 32 pins > > usb2 at ohci0: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev > > 1.00/1.00 addr 1 > > usb3 at ohci1: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > > 1.00/1.00 addr 1 > > scsibus1 at sdmmc0: 2 targets, initiator 0 > > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, CBADS, 0010> removable > > sd1: 30007MB, 512 bytes/sector, 61454336 sectors > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > bootfile: sd0a:/bsd > > boot device: sd0 > > root on sd1a (1593ab2ee369c420.a) swap on sd1b dump on sd1b > > > > # sysctl hw.sensors > > hw.sensors.sxits0.temp0=40.20 degC > > hw.sensors.axppmic0.temp0=35.00 degC > > hw.sensors.axppmic0.volt0=5.13 VDC (ACIN) > > hw.sensors.axppmic0.volt1=0.01 VDC (VBUS) > > hw.sensors.axppmic0.volt2=4.99 VDC (APS) > > hw.sensors.axppmic0.current0=0.11 A (ACIN) > > hw.sensors.axppmic0.current1=0.00 A (VBUS) > > hw.sensors.axppmic0.indicator0=On (ACIN), OK > > hw.sensors.axppmic0.indicator1=Off (VBUS) > > > > > > > > -- > > jazzi > > > > Best Regard, > > > > -- jazzi Best Regard,
