Does this mean the audio driver is not available in the default kernel? I dig /var/log and couldn't find anything related to u-boot.
I can plug on keyboard and monitor again if you tell me where & what to look for. Thanks. On Fri, Nov 11, 2022 at 6:31 AM Jan de Kruyf <jan.de.kr...@gmail.com> wrote: > > >>mixerctl: /dev/audioctl0: Device not configured > > I think o-bsd is trying to tell you that u-boot needs to do something. So > have you got the trace of u-boot starting up? > > j. > > > On Thu, Nov 10, 2022 at 2:52 PM Jazzi Hong <jazzihon...@gmail.com> wrote: >> >> Hi Fellows, >> >> Just installed OpenBSD 7.2 on Cubieboard2 which has a AllWinner A20 >> SOC, audo seems doesn't work. >> >> > $ mixerctl >> > mixerctl: /dev/audioctl0: Device not configured >> >> >> > $ sndioctl >> > default: can't open control device >> >> >> In Linux the driver is sun4i_codec, tried pkg_info -Q and also Google, >> both didn't find anything helpful. >> >> Is the driver missing now? This is my first time to install OpenBSD so >> kind of getting lost, any hints will be appreciated. >> >> >> === dmesg and hw.sensors === >> >> # dmesg >> OpenBSD 7.2 (GENERIC) #71: Thu Sep 29 11:47:02 MDT 2022 >> dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC >> real mem = 954286080 (910MB) >> avail mem = 926662656 (883MB) >> random: good seed from bootblocks >> mainbus0 at root: Cubietech Cubieboard2 >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A7 r0p4 >> cpu0: 32KB 32b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu0: 256KB 64b/line 8-way L2 cache >> cortex0 at mainbus0 >> psci0 at mainbus0: PSCI 0.0 >> sxiccmu0 at mainbus0 >> agtimer0 at mainbus0: 24000 kHz >> simplebus0 at mainbus0: "soc" >> sxiccmu1 at simplebus0 >> sxipio0 at simplebus0: 175 pins >> sxirtc0 at simplebus0 >> sxisid0 at simplebus0 >> ampintc0 at simplebus0 nirq 160, ncpu 2: "interrupt-controller" >> "system-control" at simplebus0 not configured >> "interrupt-controller" at simplebus0 not configured >> "dma-controller" at simplebus0 not configured >> "lcd-controller" at simplebus0 not configured >> "lcd-controller" at simplebus0 not configured >> "video-codec" at simplebus0 not configured >> sximmc0 at simplebus0 >> sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma >> "usb" at simplebus0 not configured >> "phy" at simplebus0 not configured >> ehci0 at simplebus0 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev >> 2.00/1.00 addr 1 >> ohci0 at simplebus0: version 1.0 >> "crypto-engine" at simplebus0 not configured >> "hdmi" at simplebus0 not configured >> sxiahci0 at simplebus0: AHCI 1.1 >> sxiahci0: port 0: 3.0Gb/s >> scsibus0 at sxiahci0: 32 targets >> sd0 at scsibus0 targ 0 lun 0: <ATA, ST1000LM024 HN-M, 2BA3> >> naa.50004cf20fb99f7f >> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors >> ehci1 at simplebus0 >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev >> 2.00/1.00 addr 1 >> ohci1 at simplebus0: version 1.0 >> "timer" at simplebus0 not configured >> sxidog0 at simplebus0 >> "ir" at simplebus0 not configured >> "codec" at simplebus0 not configured >> sxits0 at simplebus0 >> com0 at simplebus0: dw16550 >> com0: console >> sxitwi0 at simplebus0 >> iic0 at sxitwi0 >> axppmic0 at iic0 addr 0x34: AXP209 >> sxitwi1 at simplebus0 >> iic1 at sxitwi1 >> "gpu" at simplebus0 not configured >> dwge0 at simplebus0: rev 0x00, address 02:90:09:c2:25:2e >> rlphy0 at dwge0 phy 1: RTL8201L 10/100 PHY, rev. 1 >> "hstimer" at simplebus0 not configured >> "display-frontend" at simplebus0 not configured >> "display-frontend" at simplebus0 not configured >> "display-backend" at simplebus0 not configured >> "display-backend" at simplebus0 not configured >> gpio0 at sxipio0: 32 pins >> gpio1 at sxipio0: 32 pins >> gpio2 at sxipio0: 32 pins >> gpio3 at sxipio0: 32 pins >> gpio4 at sxipio0: 32 pins >> gpio5 at sxipio0: 32 pins >> gpio6 at sxipio0: 32 pins >> gpio7 at sxipio0: 32 pins >> gpio8 at sxipio0: 32 pins >> usb2 at ohci0: USB revision 1.0 >> uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev >> 1.00/1.00 addr 1 >> usb3 at ohci1: USB revision 1.0 >> uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev >> 1.00/1.00 addr 1 >> scsibus1 at sdmmc0: 2 targets, initiator 0 >> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, CBADS, 0010> removable >> sd1: 30007MB, 512 bytes/sector, 61454336 sectors >> vscsi0 at root >> scsibus2 at vscsi0: 256 targets >> softraid0 at root >> scsibus3 at softraid0: 256 targets >> bootfile: sd0a:/bsd >> boot device: sd0 >> root on sd1a (1593ab2ee369c420.a) swap on sd1b dump on sd1b >> >> # sysctl hw.sensors >> hw.sensors.sxits0.temp0=40.20 degC >> hw.sensors.axppmic0.temp0=35.00 degC >> hw.sensors.axppmic0.volt0=5.13 VDC (ACIN) >> hw.sensors.axppmic0.volt1=0.01 VDC (VBUS) >> hw.sensors.axppmic0.volt2=4.99 VDC (APS) >> hw.sensors.axppmic0.current0=0.11 A (ACIN) >> hw.sensors.axppmic0.current1=0.00 A (VBUS) >> hw.sensors.axppmic0.indicator0=On (ACIN), OK >> hw.sensors.axppmic0.indicator1=Off (VBUS) >> >> >> >> -- >> jazzi >> >> Best Regard, >> -- jazzi Best Regard,
