Hello,
so thank you for all the support. I have performed fresh downloads
again:
bootloader from here: https://github.com/pftf/RPi4/releases/tag/v1.13
I did not get this one to work:
https://github.com/raspberrypi/firmware/tree/master/boot
I did not get this one to work:
https://github.com/raspberrypi/firmware/tree/next/boot
Install instructions from here:
https://ftp.openbsd.org/pub/OpenBSD/6.7/arm64/INSTALL.arm64
I have:
* formatted the SD card, made a 0xc partition, vfat filesystem,
extracted the v1.13 UEFI files
* installed miniroot67.fs on the stick
* I think I changed the MMC configuration in the bootloader, I did not
touch device tree/AHCI
* installed OpenBSD 6.7 ARM64
* formatted the SD card, made a 0xc partition, vfat filesystem,
extracted the v1.13 UEFI files
When I place the device in the connection where my normal firewall sits,
I get pings of 1000ms (see attachment). This is 3000x slower than my
beagle bone black with an old OpenBSD.
**** the problem I am trying to solve is slow fixed ethernet ****
I provide you with the output of dmesg (see attachment) and of a boot
capture on the serial port (see attachment). The boot capture contains
the output from "ifconfig".
Maybe you can help,
Oliver
fw# ping 192.168.180.186
PING 192.168.180.186 (192.168.180.186): 56 data bytes
64 bytes from 192.168.180.186: icmp_seq=0 ttl=64 time=678.260 ms
64 bytes from 192.168.180.186: icmp_seq=1 ttl=64 time=1585.563 ms
64 bytes from 192.168.180.186: icmp_seq=2 ttl=64 time=1189.538 ms
64 bytes from 192.168.180.186: icmp_seq=3 ttl=64 time=1239.649 ms
64 bytes from 192.168.180.186: icmp_seq=4 ttl=64 time=1414.148 ms
64 bytes from 192.168.180.186: icmp_seq=5 ttl=64 time=1286.520 ms
64 bytes from 192.168.180.186: icmp_seq=6 ttl=64 time=1662.260 ms
64 bytes from 192.168.180.186: icmp_seq=7 ttl=64 time=1199.159 ms
64 bytes from 192.168.180.186: icmp_seq=8 ttl=64 time=1474.203 ms
64 bytes from 192.168.180.186: icmp_seq=9 ttl=64 time=1581.503 ms
64 bytes from 192.168.180.186: icmp_seq=10 ttl=64 time=1051.268 ms
64 bytes from 192.168.180.186: icmp_seq=11 ttl=64 time=1158.569 ms
64 bytes from 192.168.180.186: icmp_seq=12 ttl=64 time=1165.194 ms
64 bytes from 192.168.180.186: icmp_seq=13 ttl=64 time=1138.305 ms
64 bytes from 192.168.180.186: icmp_seq=14 ttl=64 time=1010.704 ms
64 bytes from 192.168.180.186: icmp_seq=15 ttl=64 time=1285.797 ms
64 bytes from 192.168.180.186: icmp_seq=16 ttl=64 time=1325.955 ms
^C
--- 192.168.180.186 ping statistics ---
19 packets transmitted, 17 packets received, 10.5% packet loss
round-trip min/avg/max/std-dev = 678.260/1261.564/1662.260/234.370 ms
OpenBSD 6.7 (GENERIC.MP) #602: Thu May 7 13:45:48 MDT 2020
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 1993908224 (1901MB)
avail mem = 1902596096 (1814MB)
mainbus0 at root: ACPI
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: https://github.com/pftf/RPi4 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.13" date
May 13 2020 10:40:33
smbios0: Sony UK Raspberry Pi 4 Model B
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
ampintc0 at mainbus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller"
agtimer0 at mainbus0: tick rate 54000 KHz
acpi0 at mainbus0: ACPI 6.3
acpi0: sleep states
acpi0: tables DSDT FACP CSRT DBG2 GTDT APIC PPTT SPCR
acpi0: wakeup devices
"BCM2849" at acpi0 not configured
"BCM2835" at acpi0 not configured
"BCM2854" at acpi0 not configured
"ACPI0004" at acpi0 not configured
xhci0 at acpi0 XHC0 addr 0x600000000/0x1000 irq 175, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0004" at acpi0 not configured
"BCM2848" at acpi0 not configured
"BCM2850" at acpi0 not configured
"BCM2856" at acpi0 not configured
"BCM2845" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2838" at acpi0 not configured
"BCM2839" at acpi0 not configured
"BCM2844" at acpi0 not configured
pluart0 at acpi0 URT0 addr 0xfe201000/0x1000 irq 153: console
"BCM2836" at acpi0 not configured
"BCM2EA6" at acpi0 not configured
"MSFT8000" at acpi0 not configured
"BCM2847" at acpi0 not configured
"BCM2855" at acpi0 not configured
bse0 at acpi0 ETH0 addr 0xfd580000/0x10000 irq 189: address dc:a6:32:32:5d:7b
brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2
cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3
cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3
cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3
cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev
2.10/4.21 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "General USB Flash Disk" rev
2.00/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <General, USB Flash Disk, 1100> removable
serial.090c1000KL0000000586
sd0: 3837MB, 512 bytes/sector, 7858176 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (2d1f2fa8d77f40fe.a) swap on sd0b dump on sd0b
Initialising SDRAM 'Micron' 16Gb x1 total-size: 16 Gbit 3200
Loading recovery.elf hnd: 0x00000000
Failed to read recovery.elf error: 6
Loading start4.elf hnd: 0x00000206
Loading fixup4.dat hnd: 0x00000202
MEM GPU: 76 ARM: 948 TOTAL: 1024
FIXUP src: 128 256 dst: 948 1024
Starting start4.elf @ 0xfec00200
NOTICE: BL31: v2.3():v2.3
NOTICE: BL31: Built : 10:40:51, Apr 21 2020
UEFI firmware (version UEFI Firmware v1.13 built at 10:40:14 on May 13 2020)
3hESC (setup), F1 (shell), ENTER (boot)......disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 0.22
|/-\|/-\|/boot>
-\|/-\|/booting sd0a:/bsd:
-\|/-\7767720|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1502416|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+545796-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+849332\
[512309|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+109+966984|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+545868\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\]=0xd4
34b8
FACP CSRT DBG2 GTDT APIC PPTT SPCR
type 0x0 pa 0x0 va 0x0 pages 0x1d0 attr 0xe
type 0x6 pa 0x1d0000 va 0xae5075000 pages 0x20 attr 0x800000000000000e
type 0x0 pa 0x1f0000 va 0x0 pages 0x10 attr 0xe
type 0x2 pa 0x200000 va 0x0 pages 0x4000 attr 0xe
type 0x7 pa 0x4200000 va 0x0 pages 0x2ead6 attr 0xe
type 0x2 pa 0x32cd6000 va 0x0 pages 0xc90 attr 0xe
type 0x1 pa 0x33966000 va 0x0 pages 0x2a attr 0xe
type 0x9 pa 0x33990000 va 0x0 pages 0x80 attr 0xe
type 0x5 pa 0x33a10000 va 0xb188b5000 pages 0x80 attr 0x800000000000000e
type 0x9 pa 0x33a90000 va 0x0 pages 0x20 attr 0xe
type 0x5 pa 0x33ab0000 va 0xb18955000 pages 0x80 attr 0x800000000000000e
type 0x7 pa 0x33b30000 va 0x0 pages 0xf89 attr 0xe
type 0x4 pa 0x34ab9000 va 0x0 pages 0x5c7 attr 0xe
type 0x7 pa 0x35080000 va 0x0 pages 0x92 attr 0xe
type 0x4 pa 0x35112000 va 0x0 pages 0x1 attr 0xe
type 0x7 pa 0x35113000 va 0x0 pages 0x2a attr 0xe
type 0x4 pa 0x3513d000 va 0x0 pages 0x18e7 attr 0xe
type 0x7 pa 0x36a24000 va 0x0 pages 0x197 attr 0xe
type 0x3 pa 0x36bbb000 va 0x0 pages 0x445 attr 0xe
type 0x5 pa 0x37000000 va 0xb1bea5000 pages 0x190 attr 0x800000000000000e
type 0x6 pa 0x37190000 va 0xb1c035000 pages 0x250 attr 0x800000000000000e
type 0x7 pa 0x373e0000 va 0x0 pages 0x1f attr 0xe
type 0x4 pa 0x373ff000 va 0x0 pages 0x1 attr 0xe
type 0x7 pa 0x37400000 va 0x0 pages 0x30b9 attr 0xe
type 0x3 pa 0x3a4b9000 va 0x0 pages 0x36 attr 0xe
type 0x4 pa 0x3a4ef000 va 0x0 pages 0xf11 attr 0xe
type 0x7 pa 0x40000000 va 0x0 pages 0x40000 attr 0xe
[ bsd ELF symbol table not valid: bad magic ]
[ no symbol table formats found ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.7 (GENERIC.MP) #602: Thu May 7 13:45:48 MDT 2020
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 1993908224 (1901MB)
avail mem = 1902596096 (1814MB)
mainbus0 at root: ACPI
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: https://github.com/pftf/RPi4 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.13" date
May 13 2020 10:40:33
smbios0: Sony UK Raspberry Pi 4 Model B
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
ampintc0 at mainbus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller"
agtimer0 at mainbus0: tick rate 54000 KHz
acpi0 at mainbus0: ACPI 6.3
acpi0: sleep states
acpi0: tables DSDT FACP CSRT DBG2 GTDT APIC PPTT SPCR
acpi0: wakeup devices
"BCM2849" at acpi0 not configured
"BCM2835" at acpi0 not configured
"BCM2854" at acpi0 not configured
"ACPI0004" at acpi0 not configured
xhci0 at acpi0 XHC0 addr 0x600000000/0x1000 irq 175, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0004" at acpi0 not configured
"BCM2848" at acpi0 not configured
"BCM2850" at acpi0 not configured
"BCM2856" at acpi0 not configured
"BCM2845" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2838" at acpi0 not configured
"BCM2839" at acpi0 not configured
"BCM2844" at acpi0 not configured
pluart0 at acpi0 URT0 addr 0xfe201000/0x1000 irq 153: console
"BCM2836" at acpi0 not configured
"BCM2EA6" at acpi0 not configured
"MSFT8000" at acpi0 not configured
"BCM2847" at acpi0 not configured
"BCM2855" at acpi0 not configured
bse0 at acpi0 ETH0 addr 0xfd580000/0x10000 irq 189: address dc:a6:32:32:5d:7b
brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2
cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3
cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3
cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3
cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev
2.10/4.21 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "General USB Flash Disk" rev
2.00/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <General, USB Flash Disk, 1100> removable
serial.090c1000KL0000000586
sd0: 3837MB, 512 bytes/sector, 7858176 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (2d1f2fa8d77f40fe.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (2d1f2fa8d77f40fe.a): file system is clean; not checking
/dev/sd0e (2d1f2fa8d77f40fe.e): file system is clean; not checking
/dev/sd0d (2d1f2fa8d77f40fe.d): file system is clean; not checking
pf enabled
net.inet.ip.forwarding: 0 -> 1
net.inet.ip.redirect: 1 -> 0
starting network
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
kvm_mkdb: can't open /dev/ksyms
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd dhcpd smtpd sndiod.
starting package daemons: vnstatd(absent).
starting local daemons: cron.
Wed May 13 12:41:43 CEST 2020
OpenBSD/arm64 (fw.home.os10000.net) (console)
login: root
Password:
Last login: Wed May 13 12:42:10 on console
OpenBSD 6.7 (GENERIC.MP) #602: Thu May 7 13:45:48 MDT 2020
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have new mail.
fw#
dmesg : > dmesg.txt
fw# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 3 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
bse0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 1 priority 0 llprio 3
media: Ethernet autoselect (none)
status: no carrier
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
enc0: flags=0<>
index 2 priority 0 llprio 3
groups: enc
status: active
vlan100: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 4 priority 0 llprio 3
encap: vnetid 100 parent bse0 txprio packet rxprio outer
groups: vlan egress
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.100.1 netmask 0xffffff00 broadcast 192.168.100.255
vlan110: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 5 priority 0 llprio 3
encap: vnetid 110 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
vlan140: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 6 priority 0 llprio 3
encap: vnetid 140 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.140.1 netmask 0xffffff00 broadcast 192.168.140.255
vlan160: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 7 priority 0 llprio 3
encap: vnetid 160 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.160.1 netmask 0xffffff00 broadcast 192.168.160.255
vlan169: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 8 priority 0 llprio 3
encap: vnetid 169 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 169.254.10.1 netmask 0xffff0000 broadcast 169.254.255.255
vlan170: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 9 priority 0 llprio 3
encap: vnetid 170 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.170.1 netmask 0xffffff00 broadcast 192.168.170.255
vlan180: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 10 priority 0 llprio 3
encap: vnetid 180 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.180.1 netmask 0xffffff00 broadcast 192.168.180.255
vlan190: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 11 priority 0 llprio 3
encap: vnetid 190 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.190.1 netmask 0xffffff00 broadcast 192.168.190.255
vlan200: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 12 priority 0 llprio 3
encap: vnetid 200 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.200.1 netmask 0xffffff00 broadcast 192.168.200.255
vlan220: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 13 priority 0 llprio 3
encap: vnetid 220 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.220.1 netmask 0xffffff00 broadcast 192.168.220.255
vlan230: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 14 priority 0 llprio 3
encap: vnetid 230 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.230.1 netmask 0xffffff00 broadcast 192.168.230.255
vlan240: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr dc:a6:32:32:5d:7b
index 15 priority 0 llprio 3
encap: vnetid 240 parent bse0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.240.1 netmask 0xffffff00 broadcast 192.168.240.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 16 priority 0 llprio 3
groups: pflog
fw# /etc/rc.d/dhcpd stop
dhcpd(ok)
fw# ping 10.0.0.186
PING 10.0.0.186 (10.0.0.186): 56 data bytes
64 bytes from 10.0.0.186: icmp_seq=0 ttl=64 time=0.524 ms
^C
--- 10.0.0.186 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.524/0.524/0.524/0.000 ms
fw# scp dme fw# scp dmesg.txt
fw# scp
dmesg.txt os10000@10.0.0.186:.
The authenticity of host '10.0.0.186 (10.0.0.186)' can't be established.
ECDSA key fingerprint is SHA256:G9GSAyfaCCbhysKoT9no7XKU8pJJDMhdurfstS2M90A.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '10.0.0.186' (ECDSA) to the list of known hosts.
os10000@10.0.0.186's password:
Permission denied, please try again.
os10000@10.0.0.186's password:
dmesg.txt 0% 0 0.0KB/s --:--
ETAdmesg.txt 100% 3175 2.1MB/s 00:00
fw# shutdown -p now
Shutdown NOW!
shutdown: [pid 55866]
fw#
*** FINAL System shutdown message from r...@fw.home.os10000.net ***
System going down IMMEDIATELY
System shutdown time has arrived
