Hi, can you see boot prompt at least? You could try: boot> set tty fb0 -- Krystian
> Wiadomość napisana przez Alexander Shendi (Web.DE) <alexander.she...@web.de> > w dniu 08.04.2020, o godz. 19:53: > > Hi, > > I've been trying to install OpenBSD-current/arm64 on my 11" 1080p Pinebook. > > I did the following (under NetBSD 9, if it's of interest) > 1. Download miniroot67.fs > 2. Download the dtb package > 3. Download the u-boot-aarch64 package. > 4. Execute (as root) "dd if=Downloads/miniroot67.fs of=/dev/rld0c bs=1m > conv=sync" > 5. Mount /dev/ld0e on /mnt > 6. Execute "mkdir /mnt/vendor/" > 7. Unpack the dtb package. Copy the file sun50i-a64-pinebook.dtb to > /mnt/vendor. > 8. Unmount /mnt. > 9. Unpack the u-boot-aarch64 package. Locate the file > "u-boot-sunxi-with-spl.bin". > 10. Execute "dd if=u-boot-sunxi-with-spl.bin of=/dev/rsd0c bs=1024 seek=8 > conv=sync" > 11. Reboot > 12. Connect an amd64 machine via serial cable to the Pinebook. Execute > "minicom -D /dev/cuaU0" as root. > > I fail to see any output on either the Pinebook's screen or the serial > console. > In fact minicom protests that /dev/cuaU0 isn't configured. > > Any help will be appreciated. > > Best Regards, > > Alexander > > > -- > You have zero privacy anyway. Get over it. > > Scott McNealy 1999
