Hi Olivier, 

Thank you very much for responding. 

I am sorry, but I am unable to understand what you mean. Sorry for being so 
dense. 

1. I already installed miniroot67.fs to an SD card. What do I need an USB drive 
for?
2. I believe I installed uboot in /dev/rld0c 
(the SD card slot) as indicated below. I just saw the message says "/dev/rsd0c" 
instead of "/dev/rld0c". Blame autocorrect. 

Can I do something else to debug the setup? TIA. 

Regards, 

Alexander 


Am 8. April 2020 20:24:08 MESZ schrieb Olivier <oliv...@burelli.fr>:
>Hi
>
>Goal is to :
>
>1. up an usb stick with dtb --> To provide firmware after U-BOOT
>2. create a sd card / emmc card with U-BOOT --> to boot (i Think also
>that for AllWinner you have no need to install dtb on emmc / sdcard)
>3. from u-BOOT
>       usb start
>       reboot
>4. start on USB Stick.
>
>a) Where did you install U-BOOT ?
>b) I am not sure thae for pinebook which TTL to use :
>cu -s 115200 -l /dev/cuaU0 (for me on RockPro64)
>
>Oliv.
>
>
>On Wed, 08 Apr 2020 19:53:14 +0200
>"Alexander Shendi (Web.DE)" <alexander.she...@web.de> wrote:
>
>> Hi,
>> 
>> I've been trying to install OpenBSD-current/arm64 on my 11" 1080p
>Pinebook. 
>> 
>> I did the following (under NetBSD 9, if it's of interest) 
>> 1. Download miniroot67.fs 
>> 2. Download the dtb package
>> 3. Download the u-boot-aarch64 package. 
>> 4. Execute (as root) "dd if=Downloads/miniroot67.fs of=/dev/rld0c
>bs=1m conv=sync" 
>> 5. Mount /dev/ld0e on /mnt
>> 6. Execute "mkdir /mnt/vendor/" 
>> 7. Unpack the dtb package. Copy the file sun50i-a64-pinebook.dtb to
>/mnt/vendor. 
>> 8. Unmount /mnt. 
>> 9. Unpack the u-boot-aarch64 package. Locate the file
>"u-boot-sunxi-with-spl.bin". 
>> 10. Execute "dd if=u-boot-sunxi-with-spl.bin of=/dev/rsd0c bs=1024
>seek=8 conv=sync" 
>> 11. Reboot
>> 12. Connect an amd64 machine via serial cable to the Pinebook.
>Execute "minicom -D /dev/cuaU0" as root. 
>> 
>> I fail to see any output on either the Pinebook's screen or the
>serial console. 
>> In fact minicom protests that /dev/cuaU0 isn't configured. 
>> 
>> Any help will be appreciated. 
>> 
>> Best Regards, 
>> 
>> Alexander 
>> 
>> 
>> --
>> You have zero privacy anyway. Get over it.
>> 
>> Scott McNealy 1999
>
>-- 
>burelli.fr <oliv...@burelli.fr>

--
You have zero privacy anyway. Get over it.

Scott McNealy 1999

Reply via email to